Bigsmudge
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Bigsmudge
-
-
5 hours ago, MrHappy said:
you got a tamper circuit on this contact ?
YES
4 hours ago, datadiffusion said:Sets when linked out at panel end or contact end though?
sets when linked at panel end But bells out when door closed
3 hours ago, PeterJames said:Its most likely a short between tamper and circuit, are there any spare cores on the cable?
Ok thanks I`ll see if there is enough play in the cable to try it
-
I have an accenta G3 which has been fine for some years Recently there has been a problem with a door contact causing false alarms I have changed both the contact and the magnet twice But now the alarm wont set I link out the circuit in question (5) and the alarm sets so you would think faulty cable or faulty contact yet the contact bells through to the panel when tested with a multi meter and appears to work perfectlyThe alarm works when the circuit is linked out but wont set when the contact is connected as said i have tried 2 new contacts but still no joy Any Ideas ??
ACCENTA G3 DOOR CONTACT PROBLEM
in Control Panels (Public)
Posted
Problem solved As its domestic with very little chance of tampering (yes i know its not to standards) Ive linked out the tamper circuit and everything now works fine MANY THANKS saved me a lot of head scratching