Kevalino
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Kevalino
-
-
Case closed, then, what an idiot I've been! The Tyco thing I wouldn't have known but I'm sure I read the MCS730 worked with a Powermaster but obviously not! Thanks to all for your help.
-
Thanks, James. Had no idea about this - will try to get a refund and buy a proper one!
-
Not solved my problems yet but at least there is somebody out there who knows about the Visonic system!
-
Thank you! Wondered if this was the problem. Any idea on the siren?
-
I have a Powermaster 10 and have just bought an external siren (MCS-730) and the Powerlink3 module.
I can't enrol the siren. There is no enrol button on the pcb and I have tried pressing the test button but this just sets off the alarm.
The Powerlink module doesn't work either. Option 7 in the setup menu doesn't exist and the manual says that if this is the case, then make sure it's installed properly. It only has a flat ribbon cable and network lead, so not much to do wrong there. The packet was labelled Tyco and I wondered if it was specific to them?
Not much help on the internet for this system and I think I may have made a mistake getting it.
Visonic Powermaster 10 help
in Members Lounge (Public)
Posted
Thank you. I have gone through the installation with an experienced Visonic engineer and discovered that the firmware is out of date. I have to decide whether to attempt flashing.