[Optima XL6 manual needed]

Zone 3 could be illuminated because a PIR ( movement detector ) is active , or faulty.Have a read of the manual to make sure you are setting it correctly.

Next step should be to call in an engineer , ask around family and neighbours for a recommendation , and have the battery checked out too.

Regards.

many thanks...

[Optima XL6 manual needed]

Hi ,

What is showing on the display when you set the alarm ?.If zone 1 is illuminated , then its most probable that the front door is open , or the detection device is faulty.Try looking for a surface mounted contact with a small wire going to it , or a flush mounted contact sunk into the frame.These come as a pair (switch on the frame , magnet on the door).

Its possible that the front door has been replaced , and the magnet is missing.

Regards.

Hi there,

when i enter the alarm code zones 1 & 3 are lit and the broken beeper sounds... this happens when the front door is closed - i've have a look tonight and see if I can see anything. Who's it best to contact if i need a new magnet - is it a case of getting an engineer out?

thanks for your help....

[Optima XL6 manual needed]

please could you also email me one for the Optima XL6? also just moved and when tried setting tthe alarm the 'fault in setting' is sounding i.e. the zone indiactors are lit with a broken beep tone - any ideas what the problem might be?

many thanks!