magpye Posted June 21, 2005 Share Posted June 21, 2005 Yes, I know it's old (very,1968) but I still need the user manual, well, page two only, the one showing how to change the user code, or Keycode as Shorrock call it. It's in section 2.1.3, I've got all the rest but this page got ripped at sometime in the past and I'm missing the top half, too many bits of paper in the same box, and the bit I want has gone! If anyone has these details I would be very grateful, magpye Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
PJF Posted June 21, 2005 Share Posted June 21, 2005 Hi Magpye, I work for Initial and even I havent got a manual on that thing. I will try and get the info tommorrow for you off some of the old timers.They may be old but there is still a few of them out there. I had the pleasure on sunday after the lightning of trying to prog one (without the manual). Quote Top tip: if you ever catch fire, try to avoid seeing yourself in the mirror, because i bet thats what REALLY throws you into a panic and dont forget the one thing you cant recycle is wasted time. Link to comment Share on other sites More sharing options...
magpye Posted June 21, 2005 Author Share Posted June 21, 2005 PJF, thanks for that. By the way, I'm one of the 'old timers' been at it for 30yrs+, ask your guys if any remember the Model 88, 89 or 91 Tele-Alarm, SID 27s Seismic Detector or 23p PSU (got the paperwork for these!!!!!) magpye Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
kgilly Posted June 21, 2005 Share Posted June 21, 2005 I'm not 100% but isn't it code # and then new code??? try it Quote Quote of the day: A good friend will bail you out of jail but a true friend will be sitting next to you saying damn we fcuked up!!! management treat us like mushrooms!! keep us in the dark and feed us bullsiht!!! Link to comment Share on other sites More sharing options...
magpye Posted June 22, 2005 Author Share Posted June 22, 2005 kgilly, thanks for that, sounds right but, I'd rather know, best to ring the customer with 'do this' rather than 'do this, see if it works', if you see what I mean. magpye Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
Selsport69 Posted June 22, 2005 Share Posted June 22, 2005 I am sure it is Code #. It is * to isolate zones.. The 1500 didnt have any programming to it. It was all done via cutting resistors or links on the main PCB. The only thing you can programme via the keypad was the codes. One of the easier Shorrock panels. Try doing the 1600 not the KS1600 with out a programming card. Now thats fun. Quote Kev Link to comment Share on other sites More sharing options...
kgilly Posted June 23, 2005 Share Posted June 23, 2005 i'm gathering you never see a shorrock 72 4 zone panel keyswitch or the one with the solinoid so you can't turn the keyswitch to on while the system is in fault??? Quote Quote of the day: A good friend will bail you out of jail but a true friend will be sitting next to you saying damn we fcuked up!!! management treat us like mushrooms!! keep us in the dark and feed us bullsiht!!! Link to comment Share on other sites More sharing options...
PJF Posted June 23, 2005 Share Posted June 23, 2005 Magpye, I havent forgot. Im meeting an engineer at the office tomorrow and he has a reference card that shows how to prog a 1600. He did try to explain over the phone but it seems a bit long winded. I will post tomorrow PJF Quote Top tip: if you ever catch fire, try to avoid seeing yourself in the mirror, because i bet thats what REALLY throws you into a panic and dont forget the one thing you cant recycle is wasted time. Link to comment Share on other sites More sharing options...
magpye Posted June 23, 2005 Author Share Posted June 23, 2005 Well, I'm sorry, could not think of the model number for one of those, know how to fix them though, take the covers off the relays and give them a good blow - if they ever went wrong that is. Once installed a multicircuit, about 8/10 boxes (100 or so cts.)with great big rotary switches for isolation etc, and two 'pea' bulbs to each circuit. If I hunt hard enough, I might even have some paperwork if any one needs it for fault finding!!!!! - I bet it would still work today even after 25+ years. how many of todays panels will be working in 25+ years, not many, if any. magpye ps Who renmembers the old Acorn control panels from, I think, Cornwall. Both battery only and a mains version? Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
PJF Posted June 23, 2005 Share Posted June 23, 2005 I think that Ive heard of the acorn panels, did they come in wooden boxes and only had a key switch on the front. Some of the old stuff was built to last, apart from not liking surges,lightning etc they seem to last 15+ years no problem. I have spent many a happy couple of hours trying to fix the latter model shorrocks & securicor panels, most of them do tend to come back to life and stay ok. Quote Top tip: if you ever catch fire, try to avoid seeing yourself in the mirror, because i bet thats what REALLY throws you into a panic and dont forget the one thing you cant recycle is wasted time. Link to comment Share on other sites More sharing options...
Nova-Security Posted June 23, 2005 Share Posted June 23, 2005 No mention of one of the first muliplexed panels, the 2000 and the CATS coded alarm transmitters, Acorn at the time a great little panel, why did they have that dull green and brown colour scheme for their early panels like the 72 Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
magpye Posted June 23, 2005 Author Share Posted June 23, 2005 Oh dear, started something here didn't I? Well if we are all going to reminisce what about A&G BS80, AES Autodial 271L, G.Lowe PC39, MGR100A, Sesco S190 Control, Spectre Euromaster and more and more and ....... magpye Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
Paul Giles Posted June 23, 2005 Share Posted June 23, 2005 Genesis? Old 80's Scruffycore panel. Quote PG Security Systems Somerset SSAIB Certificate of Merit Installers. www.pgsecurity.co.uk Link to comment Share on other sites More sharing options...
bellman Posted June 23, 2005 Share Posted June 23, 2005 Oh dear, started something here didn't I?Well if we are all going to reminisce what about A&G BS80, AES Autodial 271L, G.Lowe PC39, MGR100A, Sesco S190 Control, Spectre Euromaster and more and more and ....... magpye 58210[/snapback] I'm not as old as you guys But I remember the A&G BS80, The first panel I ever played with. fiddled with some BS80 super's as well. I came across an old metal cased logic four in a buttie shop last month Regards Bellman Quote Service Engineer and all round nice bloke ) The views above are mine and NOT those of my employer. Link to comment Share on other sites More sharing options...
An Engineer Posted June 23, 2005 Share Posted June 23, 2005 I've seen a few of the old Group 4 panels (various models - don't ask which ones) and have the displeasure of having to service these twice a year. Never get called out to them though. Quote Service Engineer My opinions may not reflect those of my employer, managers, colleagues, customers, friends, family or pet rabbit. Link to comment Share on other sites More sharing options...
PJF Posted June 24, 2005 Share Posted June 24, 2005 Magpye try this, its taken from a shorrock programing guide. Enter the prog mode <> option 8 ent <> cycle through keycodes ^ select keycode type <> options OFF, 19 master, 20 normal, 21 all on, 22 area 1, 23 area 2, 24 area 1 on, 25 area 2 on, ^ selects option Hope this helps, I have never been into the prog side of a 1600 so this is as clear as mud to me. Quote Top tip: if you ever catch fire, try to avoid seeing yourself in the mirror, because i bet thats what REALLY throws you into a panic and dont forget the one thing you cant recycle is wasted time. Link to comment Share on other sites More sharing options...
Selsport69 Posted June 24, 2005 Share Posted June 24, 2005 The old 72 series panel was probably one of their best panels. Built to last. Although you open some of them up and a pile of sid boards or zone splitters would fall out in front of you. The other thing with Shorrock everything was always relays. I remember getting called out to a site and I asked the guy where his panel was and he said over there. It was a cupboard with a keyswitch and a couple of leds. Open the door and it was full of relay boards. What fun I had that night. As for their newer stuff, I was one of the first to fit the 1600 panel up North along with the big 170 white basin bell box. Mind you it was easier and lighter to put up. 1600 had many problems to it like the final set button having a high resistance and locking out the keypad. 2000 & 2100 was an installers dream and a service mans nightmare. Easy for the installer to fit cats anywhere but try finding a fault when half your cats go RF failed. Had it once at a large supermarket was there most of the night and it turned out to be a cat that was no where near the circuits that went into fault. Those were the days lol Quote Kev Link to comment Share on other sites More sharing options...
magpye Posted June 24, 2005 Author Share Posted June 24, 2005 (edited) I'm enjoying this, Sunthorne ACP-2D, Solfan 1100 Control, Radiovisor Monive Panels, how about some realy obscure panels - Brocks RAED, Brocks pre'74 with 'traffic lights', Mather & Platt 20 Series, Maxim Control Panel, Selmar (no, not the car alarm), YTA, Songuard, I could go on but I think I'll save a few for another day. Perhaps we could reminisce about old detectors as well, a few to start you off >> Westool MWD, Cerberus Seismic Detector, Frowds Pulsonic USD System, Radartron Invisible Radar, that'll do for starters, your turn now. magpye Edited June 24, 2005 by magpye Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
magpye Posted June 24, 2005 Author Share Posted June 24, 2005 PJF, I'm sorry, thanks for that, I think I'll go and have a look rather than a phone call now, I'm not so sure about your instructions though, I think kgilly is nearer the mark with his suggestion, let you know next week. magpye Quote Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
mr silcox Posted July 6, 2005 Share Posted July 6, 2005 i uploaded a 1500 manual ages ago should be there somewere Quote Link to comment Share on other sites More sharing options...
Guest fish Posted September 15, 2006 Share Posted September 15, 2006 i uploaded a 1500 manual ages ago should be there somewere Did this come to a conclusion as I have a Shorrock 1500 and need to change the code. Any assistance gratefully received B) Quote Link to comment Share on other sites More sharing options...
Service Engineer Posted September 15, 2006 Share Posted September 15, 2006 I only have the 1000 and 1600 manuals, dunno if they'd be of any use.? 1600 Code change Instructions: If anyone does have the 1500 manual(s) please upload them.? Quote ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest Posted March 17, 2007 Share Posted March 17, 2007 (edited) Did this come to a conclusion as I have a Shorrock 1500 and need to change the code. Any assistance gratefully received B) Hi Are you talking about the 1500 where you power down batts and mains and code is **** on power up ? ric. Edited March 17, 2007 by breff No default codes please Quote Link to comment Share on other sites More sharing options...
Guest Posted March 17, 2007 Share Posted March 17, 2007 i uploaded a 1500 manual ages ago should be there somewere 2.1.3 to change keycode enter the current code (switches the panel on ) press the # key enter the new code then re-enter the new code to switch the panel off first digit of a customer keycode must not be 0. regards ric. i uploaded a 1500 manual ages ago should be there somewere 2.1.3 to change keycode enter the current code (switches the panel on ) press the # key enter the new code then re-enter the new code to switch the panel off first digit of a customer keycode must not be 0. regards ric. Didn't see date prob sorted by now. Quote Link to comment Share on other sites More sharing options...
AndyAAI Posted October 23, 2011 Share Posted October 23, 2011 Wow Saw the post above that read 'Sunthorne ACP-2D, Solfan 1100 Control, Radiovisor Monive Panels, how about some realy obscure panels - Brocks RAED, Brocks pre'74 with 'traffic lights', Mather & Platt 20 Series, Maxim Control Panel, Selmar (no, not the car alarm), YTA, Songuard, I could go on but I think I'll save a few for another day. Perhaps we could reminisce about old detectors as well, a few to start you off >> Westool MWD, Cerberus Seismic Detector, Frowds Pulsonic USD System, Radartron Invisible Radar, that'll do for starters, your turn now.' Sunthorne ACP-2D - also marketed by Ademco. I think our firm still has a coupe of these fitted and maintained. Solan 1100 - never heard if that, but remember Solfan microwaves. Radiovisor Monive - fell out of bed with ie of these. Took over a Banham Alarm. Banhams used to install them. Agreed to do the takeover over the phone without seeing the system. Would love more info on Maxim, the Brocks Panels, the I'd Modern Alarms Panels and the Mather and Platt gear. How about the London firm DGI (Dalton Glass Industries). They were taken over by Modern Alarms. They had there own panels. Then ofcourse, we also ave the London based Intercept Alarms, who were acquired by MASCO (Who, themselves were taken over by Protection One, and then ADT) Remember the Contronic ultrasonic detectors used by Modern Alarms. Remember Sheild Protection o Britton Street, later acquired by Hoeywell to form Heywell Shield, later to become Brittania along with Dick Cody and Aylescort of Rainham Essex. Radar Electrosystems. Gem Alarms M-tonic, GAF (General Alarm Factors) Combat Alarms. PPR Alarms. Spectre MLS (Major Lock Services) Metropolitan Alarms. Lion security - Fred Hering - Potters Bar. August Alarms of Palmers Green (Alarm Johnson or Jordon) SAS - Safety Alarms Systems of Rickansworth. Daynalarm of Rickansworth Intervene security. London Guard Instant Aid Protection. Securicor Alarms. Granly alarms. Solar alarms Enright Security. Aerial Alarms. Express alarm systems. Ideal burglar alarms. The sentinel alarm company. Anyone remember Denvire? Based in SW1 Captor - what ever happened to them? A1 Security Harrow. Rouse Security Service (RSS) Crown Security Systems in Central London - what ever appended to them? Atlantis alams of Hemel Hempstead. Again, what ever happened to there clients? Monitiring Stations - anyone remember Monitron in Ebury Brirge Road Victoria? What ever happened to them? Remember STC Central Station in Finchley? The list goes on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.