Guest SoulessEye Posted April 17, 2005 Share Posted April 17, 2005 Doh, not reading the manual properly, -ve tamper return. Ta Dave if you read the manual in more depth it tells you about the tamp and what /where to connect. depending on how you have been testing the galaxy it should be self obvious where it goespaul 49084[/snapback] Link to comment Share on other sites More sharing options...
black knight Posted April 17, 2005 Share Posted April 17, 2005 THE BLACK KNIGHT "Any comments / opinions posted are my opinion only and do not represent those of my employer or Company." Link to comment Share on other sites More sharing options...
Guest SoulessEye Posted April 17, 2005 Share Posted April 17, 2005 Enlighten me then? 49093[/snapback] Link to comment Share on other sites More sharing options...
black knight Posted April 18, 2005 Share Posted April 18, 2005 as i am sure you know by now the tamper return is the signal the sab (BELL) sends to the c/u unit - usually a negative. if the negative is lost the alarm will indicate bell tamper paul THE BLACK KNIGHT "Any comments / opinions posted are my opinion only and do not represent those of my employer or Company." Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.