JB_ Posted July 11, 2006 Share Posted July 11, 2006 Half correct. Care to elaborate? Via PM if necessary. Link to comment Share on other sites More sharing options...
j.paul Posted July 11, 2006 Share Posted July 11, 2006 Am I right in thinking if the Windsor 500 is a Chubb badged panel then the pin of the day is hard coded into the panel and can't be disabled? Anyone work for chubb and can confirm that? Well you got some of it right Maybe the wrong place to ask that type of question There are no stupid questions, but there are a LOT of inquisitive idiots. Link to comment Share on other sites More sharing options...
Gerry Posted July 11, 2006 Share Posted July 11, 2006 Gerry, like Adi said we're not allowed to openly give out engineering/ installer manuals, user manuals are generally okay as they normally do not contain information on how to "compromise" the system by showing the user how to reset the alarm to factory default settings, get in to the programming side of the alarm and thus be able to program alarm zones in / out and change the type of zone it is etc.This has been done to death in here previously, that's why Adi quoted from the "Site Rules" which we all must adhere to in order to post here. After all how would you like it, since this a public forum that a link to the engineering manual you've asked for was posted and someone near you downloaded it, found out how to bypass the system and you come home to an empty house and your codes no longer work.. That is one very good reason for not posting direct links to the such manuals. Fair point. I accept my error. Just put it down to me being a newbie! Link to comment Share on other sites More sharing options...
Adi Posted July 11, 2006 Share Posted July 11, 2006 No ones trying to be nasty mate its just sight rules we all abide by. Adi I really can't be ar**** with it anymore. Link to comment Share on other sites More sharing options...
Gerry Posted July 11, 2006 Share Posted July 11, 2006 No ones trying to be nasty mate its just sight rules we all abide by.Adi I wish I'd read them instead of jumping in with both feet. Link to comment Share on other sites More sharing options...
Adi Posted July 11, 2006 Share Posted July 11, 2006 And talking about sight i think my sight has gone, i meant site. I really can't be ar**** with it anymore. Link to comment Share on other sites More sharing options...
kjd2002 Posted October 23, 2007 Share Posted October 23, 2007 I've got the manuals for the guardall windsor 500. send me your e-mail and i get them to you. Would you be able to email me the windsor CA500 engineer manual please, as i am adding conq's and am not sure how to do it. thanks, kev. ************ Please read the forum rules. This site does not provide engineer manuals. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.