Guest rafal Posted December 16, 2004 Share Posted December 16, 2004 Hi I want to connect Odyssey 3 to Power832 /with 2 expanders/. Odyssey requires: +VE supply -VE bell -VE tamper 0V -VE stobe PC5015 has only Bell Output. Could you advise on wiring plese. Have I chosen the wrong bell box? Thanks in advance. Rafal Link to comment Share on other sites More sharing options...
Guest Hyrava Posted December 16, 2004 Share Posted December 16, 2004 Never wired Odyssey 3 to Power832, but maybe this works: +VE Supply -> AUX+ 0V -> AUX- -VE Bell -> Bell- -VE Strobe -> Bell- -VE Tamper -> Expander TAM or -VE Tamper -> any available Zone with resistor in series. Link to comment Share on other sites More sharing options...
Deltaseven Posted December 16, 2004 Share Posted December 16, 2004 HiI want to connect Odyssey 3 to Power832 /with 2 expanders/. Odyssey requires: +VE supply -VE bell -VE tamper 0V -VE stobe PC5015 has only Bell Output. Could you advise on wiring plese. Have I chosen the wrong bell box? Thanks in advance. Rafal 34749[/snapback] I think you may have a non-UK version of the Power 832. It is not ideal, but you may have to connect +VE and -VE to Aux + and -, and use the programmable outputs to connect to Bell- and Strobe -. You could then use tamper return to switch a relay on a 24hr zone to set up SAB tamper. Just be aware that you will be putting a high load on the AUX circuit - check the load in alarm to ensure that you will not blow the Aux fuse. If you are at all unsure on how to do this, then contact a local installer. D7 Link to comment Share on other sites More sharing options...
Deltaseven Posted December 16, 2004 Share Posted December 16, 2004 Oh and you will need a 1K resistor across Bell + and Bell - to avoid "Bell Trouble" condition. Link to comment Share on other sites More sharing options...
j.paul Posted December 16, 2004 Share Posted December 16, 2004 You need a relay to get the tamper to work on the Power Panels if Using Odyssey 3 sounder Strobe goes on PG2 programmed as [10] System Event... I think you may have a non-UK version of the Power 832. Non of the DSC Power panels have a tamper return like UK Panels it use's a resistor instead There are no stupid questions, but there are a LOT of inquisitive idiots. Link to comment Share on other sites More sharing options...
Guest rafal Posted December 16, 2004 Share Posted December 16, 2004 Thanks for all suggestions I will have a go tomorrow. Rafal Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.