Jump to content
Security Installer Community

Eurosec CPX control panel


Recommended Posts

Hi all,

 

I've had the above panel installed with a wireless alarm for a number of years.

It's got to the time of year again where one of the batteries in the wireless motion sensors is running low and triggering the alarm.

This is becoming more and more frequent as the battery gets lower.

My installer has stated that they cannot remember the engineers code.

 

What options do I have?

I'm not sure if removing the sensor and replacing the batteries whilst the alarm is sounding will sort it.

 

Thanks,

 

Dave

Link to comment
Share on other sites

9 minutes ago, DaveItalia90 said:

What options do I have?

I'm not sure if removing the sensor and replacing the batteries whilst the alarm is sounding will sort it.

You have two options if your doing yourself... try it and hope or no system.

The installer should know how to deal with a lost engineers code, which may involve reprogramming the system.

You should leave it up to them if you are under support obviously.

 

Link to comment
Share on other sites

9 hours ago, DaveItalia90 said:

My installer has stated that they cannot remember the engineers code.

 

lol,

 

2 hours ago, PeterJames said:

CPX didnt have any wireless detectors IIRC so they must be aftermarket with a receiver. The CPX has a built in Digi so is normally monitored. Strange combo monitored alarm with aftermarket wireless detectors. 

 

its supports a single wireless expander, 8 zone + 8 keyfobs, reports, alarms tamper, low battery ect...

 

the digi works as speech dialler,

 

its not a bad product, but gardtec quirky with cheap looking rkp

Mr th2.jpg Veritas God

Link to comment
Share on other sites

49 minutes ago, james.wilson said:

Never used a cpx but hated the cp8l used as a necessity after the 800l however quite stable hardwired 

 

went from 700l to vertias, then to euro mini as staff could not cope with led keypads (honest)

Mr th2.jpg Veritas God

Link to comment
Share on other sites

On 02/11/2021 at 11:44, DaveItalia90 said:

Hi all,

 

I've had the above panel installed with a wireless alarm for a number of years.

It's got to the time of year again where one of the batteries in the wireless motion sensors is running low and triggering the alarm.

This is becoming more and more frequent as the battery gets lower.

My installer has stated that they cannot remember the engineers code.

 

What options do I have?

I'm not sure if removing the sensor and replacing the batteries whilst the alarm is sounding will sort it.

 

Thanks,

 

Dave

Pay someone to put something upto date in....

  • Upvote 2
Link to comment
Share on other sites

  • 1 month later...

Re the CPX
Risco have now reduced significantly their product range to the point that after almost 30 years with the brand we have moved off to pastures new.
The CP8 and CPX have been removed and replacements can not be sourced, they are incidentally still supplying the detectors as they are used on other items in the Risco range.
They have also removed from the shelves the Commpact system and many of their external sounders (We had over 50 printed covers for one unit that have now been skipped as useless)

Re the engineer codes, there is an option the reset codes provided they are not locked your engineer should know how to do this (if he's worth his salt).

Link to comment
Share on other sites

9 hours ago, Slickjack said:

Re the CPX
Risco have now reduced significantly their product range to the point that after almost 30 years with the brand we have moved off to pastures new.
The CP8 and CPX have been removed and replacements can not be sourced, they are incidentally still supplying the detectors as they are used on other items in the Risco range.
They have also removed from the shelves the Commpact system and many of their external sounders (We had over 50 printed covers for one unit that have now been skipped as useless)

Re the engineer codes, there is an option the reset codes provided they are not locked your engineer should know how to do this (if he's worth his salt).

They doing you a favour , complete rubbish you just got used to ?

  • Upvote 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.