Sparkypenguin Posted August 4, 2021 Author Share Posted August 4, 2021 I've decided to buy and test a flush mounted contact to see if I can fit into the frames. Probably an Elm-6QFC(RD) and/or RFT-RD as the metered tails on the pre wired one may be too short. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted August 4, 2021 Share Posted August 4, 2021 21 minutes ago, Sparkypenguin said: I've decided to buy and test a flush mounted contact to see if I can fit into the frames. Probably an Elm-6QFC(RD) and/or RFT-RD as the metered tails on the pre wired one may be too short. look very carefully how big a gap you have between frame & door to fit the top of the nylon contact in place the stainless steel capped ones are thinner & more robust if they rub together Quote Mr Veritas God Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted August 4, 2021 Share Posted August 4, 2021 I try to avoid flush on external in case of moisture. If I have to sealed type to a JB would be my preferred. Quote Link to comment Share on other sites More sharing options...
Sparkypenguin Posted August 4, 2021 Author Share Posted August 4, 2021 Thanks for advice MrH and SWB. I quite like the idea of the multi resistor ones. Can I ask if Knight, Elmdene and CQR are all decent makes? Quote Link to comment Share on other sites More sharing options...
MrHappy Posted August 4, 2021 Share Posted August 4, 2021 There the 3 leading brands of non powered detection... However I assume non of them make the glass reeds ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.