Navigator Posted April 21, 2021 Share Posted April 21, 2021 I recently installed an i-on40H panel which is working okay but I want to do a bit of familiarisation and testing, however, I don't want to annoy the neighbours with the external sounder going off several times. I'd like to know if I can prevent this with a system setting. I know I can remove the bell trigger core but would prefer not to do it that way if possible. Thanks. Quote Link to comment Share on other sites More sharing options...
Monty Posted April 22, 2021 Share Posted April 22, 2021 Progg a bell delay long enough for you to carry out what you want to do then reset as normal ( remember to remove ) Quote www.AllanMoncrieffAlarms.com Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted April 23, 2021 Share Posted April 23, 2021 Anything you do would have a chance of forgetting to put it back. At least with the trig out you have a visual reminder. Quote Link to comment Share on other sites More sharing options...
Navigator Posted April 26, 2021 Author Share Posted April 26, 2021 Thanks guys for taking the time to reply. I hadn't thought about the bell delay but I take the point sixwheeledbeast made about there being a visible reminder. I suppose I could leave the panel lid open and jumper the panel tamper to make it really obvious if I remove the bell trigger. Whatever I do it's clear I need to think about what I want to achieve, how long it's going to take and try and not get side-tracked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.