Jump to content
Security Installer Community

Veritas R8 / Issues following powercut


Womble

Recommended Posts

Thanks everyone 

Looks like a new control panel is the way to go

My wife doesn’t want anyone in the house until the pandemic is under control - say after we have received vaccines

Unfortunately the alarm is on the same power circuit as some downstairs lights - is there anything we can do to disconnect the alarm, so we can turn the power off?

With the power on / battery unplugged it seems to detect movement and beep accordingly in one of the zones

 

thanks again!

 

Link to comment
Share on other sites

Should really have an unswitched fused connection unit adjacent the control panel if not you have no way to safely isolate separately from a shared circuit. Alarms aren't designed to be easy to "switch off"  that wouldn't sensible, this is why maintenance for them is important. If the system is working correctly you will likely trigger the external sounders again trying to isolate it.

 

If your not planning on fixing it for now and it's not making any noise I'd leave it alone IMO.

If it's just a chime sound and your confident it's caused by you activating a sensor, then you could try pressing the "music note" button to disable the chime.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.