MrHappy Posted January 29, 2021 Share Posted January 29, 2021 apart form not liking the cold & led's failing due to rotting Quote Mr Veritas God Link to comment Share on other sites More sharing options...
james.wilson Posted January 29, 2021 Share Posted January 29, 2021 C'mon it's the best stuff they make with issues but still 1 Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
backofthenet Posted January 30, 2021 Author Share Posted January 30, 2021 Thanks everyone - think this one looks and is similar dimensions to the old one Texecom Premier Odyssey 3E External Sounder FCC-0843 i'll wait for the warmer weather then make the change Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted January 30, 2021 Share Posted January 30, 2021 13 hours ago, james.wilson said: from SW point of view they also have the highest return of product. Stuff that you turnover mostly to DIYers is bound to come back more often than trade tho. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted January 30, 2021 Share Posted January 30, 2021 the stats dont say that. I suppose it depends on product and the definition of 'trade' Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
backofthenet Posted February 2, 2021 Author Share Posted February 2, 2021 Hi All, So i have replaced all the PIR's now and all is fine apart from one on the landing. The sensor light is not coming on!. So i thought faulty light and tried one of the other PIR's - alas the same - no light. I'm pretty sure the circuit is wired correctly as when i remove the cover and the alarm is armed then tamper alarm goes off. The wiring is straight forward with T1, T2, N, NC V- , V+ - wires configured as per old PIR which was fine. Any ideas as to why the sensor light won't come on? - How i can test if it is the PIR or the circuit? Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted February 2, 2021 Share Posted February 2, 2021 Blown fuse, no power? LED switched off? Digital multimeter is your friend. Quote Link to comment Share on other sites More sharing options...
PeterJames Posted February 2, 2021 Share Posted February 2, 2021 1 hour ago, sixwheeledbeast said: Blown fuse, no power? LED switched off? Digital multimeter is your friend. QFA meter to see if you have 12vdc Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 3, 2021 Share Posted February 3, 2021 Agreed looks like no power to the detector Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
backofthenet Posted February 4, 2021 Author Share Posted February 4, 2021 So did all the checks and all was in working order...... The issue was the wiring covering over the sensor!!!! - Typical DIY Job!! I have 10 (old ) spare PIR's now - 8 in fully working order - the other two work but casing cracked - are these of any use to anyone - or is it the relevant recycling skip at the TIP? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.