Jump to content
Security Installer Community

Optima 2 Plus Alarm - External Bell Box and Strobe


backofthenet

Recommended Posts

Hi,

 

I have a very old Optima 2 Plus alarm system which for my sins i have decided to get working again after many years of inactivity.

 

The system was installed in 1995 I believe - we moved in some years after. 

 

Anyway have now got most of tye system working again having made sure all PIR's are working and access / exit points are all fine.

 

However the external bell box / strobe is not working - it's as old as the alarm itself.

 

so the question is can i source a like for like replacement / repair tye existing unit (not that i know how to)

 

Best Regards

 

Mike

 

Link to comment
Share on other sites

1 hour ago, backofthenet said:

It was switched off at the power and battery removed for many years so guess that counts as decommissioned - however i have it switched on without a battery for past couple of years

Its the battery that kills them. So without a battery is fin, but when you replace the sounder you will need a battery, otherwise you wont be popular in a power cut.

Link to comment
Share on other sites

2 hours ago, backofthenet said:

Thanks Peter - would you recommend any external sounder/strobe?

Depends on what you want, We use Risco Nova but I think they are trade only, Texe Sounders are good quality, swerve Pyronix the plastic is thin.

Link to comment
Share on other sites

I'd add texecom and pyronix are mass market, they definetly hit the numbers on units sold however from SW point of view they also have the highest return of product. As Pete says risco bells

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.