Jump to content
Security Installer Community

Texe bellbox with a Euro46 panel


James R

Recommended Posts

If your texe bell box doesn't sound with a Euro46 panel it's because the Euro46 bell o/p is +... texe Bell boxes looks for a neg so either connect your bell to strobe or use a very handy relay to convert bell+ to neg. 

 

Regards 

Link to comment
Share on other sites

  • 4 weeks later...
On 23/12/2020 at 02:19, James R said:

If your texe bell box doesn't sound with a Euro46 panel it's because the Euro46 bell o/p is +... 

 

?

 

I think your mistaken.

 

Neg trigger for both bell & strobe, negtive tamper return

 

I've never inverted the bell or strobe trigger, IIRC I believe you can only invert the digi pin on the "rainbow ribbon" ?

Mr😀 Veritas God

Link to comment
Share on other sites

Thanks for the replies. 

 

All I can say was that the texecom bell box would not sound with bell connected to bell in the euro 46 panel - in bell test giving +   as soon as I gave it -   it worked.  That's all I can say.

Had a look at the manual to see if you can change the polarity of the bell O/P - didn't find anything or i'm being thick

 

Regards

Link to comment
Share on other sites

14 hours ago, James R said:

Thanks for the replies. 

 

All I can say was that the texecom bell box would not sound with bell connected to bell in the euro 46 panel - in bell test giving +   as soon as I gave it -   it worked.  That's all I can say.

Had a look at the manual to see if you can change the polarity of the bell O/P - didn't find anything or i'm being thick

 

Regards

 

4ucifv.jpg

Link to comment
Share on other sites

15 hours ago, James R said:

Thanks for the replies. 

 

All I can say was that the texecom bell box would not sound with bell connected to bell in the euro 46 panel - in bell test giving +   as soon as I gave it -   it worked.  That's all I can say.

Had a look at the manual to see if you can change the polarity of the bell O/P - didn't find anything or i'm being thick

 

Regards

Bell jumpers ?

  • Upvote 1
Link to comment
Share on other sites

On 19/01/2021 at 06:47, al-yeti said:

Bell jumpers ?

Didn't see a jumper in the bell that would convert polarity. 

 

I was thinking a non latching/very handy relay at the panel to convert. 

Link to comment
Share on other sites

1 hour ago, James R said:

Didn't see a jumper in the bell that would convert polarity. 

 

I'm guessing you've got it wired up wrong ?

 

Easy way to test most G2 Bells

 

work out the pos/neg hold off

 

touch the bell trigger to neg (it should sound)

touch the return to the bell trigger (it should sound)

touching the the strobe trigger to neg used to produce a tiny arc because of the loading of the xenon tube

 

 

Mr😀 Veritas God

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.