Jump to content
Security Installer Community

Old Veritas 8 alarm panel, lost manual, how to setup PART set Zones


Recommended Posts

Hi, i fitted it over 20 years ago ! have been adding /replacing sensors as needed. alls been fine.

However i had a new fuse box fitted, now cant use the system as cannot get into programming mode or to setup which zones are part zones.

If i key in #### PROG i get rejected tone, same with #### PROG

But if i key in #### 00 or #### 00 the leds all come on, but then keying in 51 doesnt work

If i remember right, i didnt have to do that, i think it was just programming mode > key PART > led light up that are in part set., then select which ones you want.

But this doesnt work either, 

Any ideas or a manual ?

Edited by sixwheeledbeast
No codes please
Link to post
Share on other sites

It's a Pre-2K Veritas the programming options are very different to modern ones.

Part set was option 02 IIRC. Seems like it may have lost all it's memory which is more concerning, has it been serviced and had replacement batteries in that time?

We don't provide manuals, codes or defaulting information here as per our guidelines.

 

Link to post
Share on other sites
57 minutes ago, tee cee said:

Hi, i fitted it over 20 years ago ! have been adding /replacing sensors as needed. alls been fine.

However i had a new fuse box fitted, now cant use the system as cannot get into programming mode or to setup which zones are part zones.

If i key in #### PROG i get rejected tone, same with #### PROG

But if i key in #### 00 or #### 00 the leds all come on, but then keying in 51 doesnt work

If i remember right, i didnt have to do that, i think it was just programming mode > key PART > led light up that are in part set., then select which ones you want.

But this doesnt work either, 

Any ideas or a manual ?

Better to replace panel, as if your competent as you say you are, it will be allot less hassle , and you won't go in circles 

 

 

Link to post
Share on other sites

As above, @ 20 years for a £40 panel is excellent value. Time to get your hand in your pocket. 

Nothing is foolproof to a sufficiently talented fool.


Link to post
Share on other sites

maybe the fusebox was not operating or the op may have work done which required rcd protection, or it could be like me i moved ours 3 years ago didnt reinstall the old one in new location but installed a  full rcbo board instead.

"If you carry your childhood with you, you never become old. Why rush to end life when happiness is in the blissfulness of childhood innocence."

"We all die, the goal isn't to live forever, the goal is to create something that will."

07475071344

Link to post
Share on other sites
6 minutes ago, satsuma01 said:

maybe the fusebox was not operating or the op may have work done which required rcd protection, or it could be like me i moved ours 3 years ago didnt reinstall the old one in new location but installed a  full rcbo board instead.

Lol I read that different

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.