Nova-Security Posted July 12, 2020 Share Posted July 12, 2020 15 hours ago, al-yeti said: That's what I thought C for confused dot come in my case lol They both have Comms on board tho The early pre dimension could be bought with or with comms onboard C for comms and as GG stated they didnt have any rear off wall tamper. Well that how we always order them. 1 Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
al-yeti Posted July 12, 2020 Share Posted July 12, 2020 1 hour ago, Nova-Security said: The early pre dimension could be bought with or with comms onboard C for comms and as GG stated they didnt have any rear off wall tamper. Well that how we always order them. Ok dude I remember the external coms devices and cards Quote Link to comment Share on other sites More sharing options...
GalaxyGuy Posted July 12, 2020 Share Posted July 12, 2020 Just to note that the panel you're looking at on eBay is cheap for a reason. It's not new and looks like it has been a swap out. That is, the installer has a fault on an installed system and they then switch out the PCB. If you look at the PCB, you can see that the screw terminals have been used. The PCB serial number doesn't match the box serial number and that's a classic sign of this type of swap out. I suspect that this panel will not boot, so if you do buy, don't put it on the wall without thoroughly testing it. I've had quite a few people who have bought these returns - some are lucky and some not so. I think the seller is pretty decent though. He'll refund on return. It's a bit of a hassle for the saving against buying the V7.03 CO48-D-E1 though! Especially the ones that come with Ethernet modules 1 Quote Link to comment Share on other sites More sharing options...
Cieska Posted July 13, 2020 Author Share Posted July 13, 2020 9 hours ago, GalaxyGuy said: Just to note that the panel you're looking... Thanks for the interesting review on that, I will keep this in mind. My initial idea is to set up the system to play with, to see how 'difficult' is to be a security engineer. Hopefully, any system will be just fine for that? Quote Link to comment Share on other sites More sharing options...
Cieska Posted July 13, 2020 Author Share Posted July 13, 2020 16 hours ago, GalaxyGuy said: Just to note that the panel you're looking... Thanks for the interesting review on that, I will keep this in mind. My initial idea is to set up the system to play with, to see how 'difficult' is to be a security engineer. Hopefully, any system will be just fine for that? Also, this is the main reason why it must be as cheap as possible. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted July 13, 2020 Share Posted July 13, 2020 1 hour ago, Cieska said: to see how 'difficult' is to be a security engineer. coloured wires & basic DIY skills, shave a monkey & kick it though a branch of screwfix, if its holding a multi meter & screwdriver on the way out.... vola you have have an alarm monkey however if you can take a current reading your over qualified The easy way to find out if your suitable for a job is to go & get one, if you can't do it or don't like find a different one 1 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
al-yeti Posted July 13, 2020 Share Posted July 13, 2020 45 minutes ago, MrHappy said: however if you can take a current reading your over qualified Nah, this means you can probably fault find , so qualified..... Quote Link to comment Share on other sites More sharing options...
MrHappy Posted July 13, 2020 Share Posted July 13, 2020 1 hour ago, al-yeti said: Nah, this means you can probably fault find , so qualified..... do you have a fear of heights ? why not get a job in an industry which put little plastic boxes up using triple ladders.... Quote Mr Veritas God Link to comment Share on other sites More sharing options...
al-yeti Posted July 13, 2020 Share Posted July 13, 2020 6 minutes ago, MrHappy said: do you have a fear of heights ? why not get a job in an industry which put little plastic boxes up using triple ladders.... I do a bit , hate the bell boxes high up never understood why they do that , bunch of nuttas and muppets Quote Link to comment Share on other sites More sharing options...
MrHappy Posted July 13, 2020 Share Posted July 13, 2020 I used to have jobs where you needed triple ladders to get to the endstation.... The kit needs fitting where its safe & easy for a bloke to get to Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.