Jump to content
Security Installer Community
garnayrob

Texecom Part Set with Entry / Exit

Recommended Posts

Hi,

 

Appealing to the Texecom experts for some guidance! 

 

I have a Texecom Premier Elite and want to Part Set my alarm for when the dog is home and we go out. 

 

I’ve configured Part Set 2 to omit 2 PIRs in the space the dog occupies, however what I can’t get my head around is how I enable the front door contact (Zone 9) to act as an Entry / Exit rather than being armed.

 

I want to be able to set alarm as Part Set 2 and exit through the front door contact (Zone 9) as I would when setting the alarm normally. Likewise I want to be able to enter and disarm as normal.

 

How do I achieve this? 

Share this post


Link to post
Share on other sites

A zone programmed as E/E would be E/E for all part arms as default.

My guess would be you either have enabled the Guard on Part attribute for Zone 9 or you have Part arm on Instant?

 

Share this post


Link to post
Share on other sites
2 hours ago, sixwheeledbeast said:

A zone programmed as E/E would be E/E for all part arms as default.

My guess would be you either have enabled the Guard on Part attribute for Zone 9 or you have Part arm on Instant?

 

Hi thanks for your reply. I’ve not actually changed anything on Front Door Zone 9 yet so it can probably stay set as is then, cheers  👍

Share this post


Link to post
Share on other sites

Hi all, just in case anyone else trying to do this, I ended up doing the following:

 

Omitting the two zones (setting to off) for Part Set 2 (which I renamed text to “Dog at Home).

 

No change needed to front door contact (zone 9) - this behaves the same way by default allowing you to exit and enter / counting down. 

 

I also allowed the Part Arm to exit tones in the Area Options by clearing out “AB” areas from Part Arm Silent. 
 

Had to test it all with family roaming the house, made easy with a few bits of tin foil over the active PIRs 😂
 

 

 

 

 

Share this post


Link to post
Share on other sites
34 minutes ago, garnayrob said:

a few bits of tin foil over the active PIRs 😂
 

 

 

 

 

dont forget to remove the foil now

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.