Eurosec Alarm System - siren / wiring issues

[Sideshow]

Definitely checked and heard the outside bell

[james.wilson]

Just now, Sideshow said:

Definitely checked and heard the outside bell

Ok so how did you activate it. IIRC on the eurosec the bell can be delayed on certain activations, ie timeout.

[kwc]

Set the system and trip a NON exit entry zone. This should sound the bell.

if working on bell test then can only be there is a bell delay set or tripping an entry timed zone and not waiting until full entry time has expired.

 

[aissecur]

On 29/05/2020 at 18:56, kwc said:

Set the system and trip a NON exit entry zone. This should sound the bell.

if working on bell test then can only be there is a bell delay set or tripping an entry timed zone and not waiting until full entry time has expired.

 

You need to check the zine you trigger is programmed  as a 12hr (ie instant alarm on zone) 

failing that press & hold 1 & 3 on the remote keypad to activate the panic, this will give you a full alarm condition