Jump to content
Security Installer Community

Scantronic 808


Recommended Posts

I've got an old 808 with a fault that will not clear.

 

The LCD star burst display reads:

 

PAS B H

or 

PA5 B H

as it's a star burst display its difficult to read.

 

Any ideas as all ccts are ok... It fails test on existing eng mode. 

20200520_163244.jpg

Link to comment
Share on other sites

2 hours ago, Wooly-bobs said:

I've got an old 808 with a fault that will not clear.

 

The LCD star burst display reads:

 

PAS B H

or 

PA5 B H

as it's a star burst display its difficult to read.

 

Any ideas as all ccts are ok... It fails test on existing eng mode. 

20200520_163244.jpg

Scrrrrrrrrap

Link to comment
Share on other sites

5 hours ago, datadiffusion said:

Wow, an 808 on starburst

 

Unfortunately I only ever used the starburst as an arming station.

 

Do you have the eng manual though?

Got the manual from the SRI disc but the starburst descriptors dont list this particular fault code... it's a wierd one..

Link to comment
Share on other sites

Yeah sorry I didn't notice you were trade.

 

I too checked the manual and like you say it's not in there!

 

Do you deffo get the 'Cant exit faults = 1' type text when you try and exit, but before this, then?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

Yeah I'd have to say even as a scanny fan this is never a panel I've wanted to support.

 

Actually I've only ever fitted an 816. Does the 808 only support starbrust then?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

I've never been a fan of this particular panel mainly because its mounted in a right awkward place that requires contortion skills to work on..

 

I've checked the wiring, nothing a miss, did power cycle the unit but still a fault. 

I did tell customer that a new unit wasnt out of the question, this thing is old, the clock memory fails on it after being set.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.