Jump to content
Security Installer Community

Galaxy output issue


Recommended Posts

Got a galaxy dimension that activates fine on all groups apart from one group...sounders assigned to that group don't activate but comms goes through fine. Had a look at all the group parameters and output programming but can't see anything out of the blue. Any suggestions? Thanks

Link to comment
Share on other sites

36 minutes ago, xpertalarms said:

Got a galaxy dimension that activates fine on all groups apart from one group...sounders assigned to that group don't activate but comms goes through fine. Had a look at all the group parameters and output programming but can't see anything out of the blue. Any suggestions? Thanks

How is the setup? 

 

How many groups and all Sounders seperated to each group? 

 

Or you saying common sounder doesn't activate or output only for that group doesn't activate

3 minutes ago, Logan said:

I only know galaxy 60 unfortunately 

Come on Logan you don't know the galaxy 60 ?

Link to comment
Share on other sites

The setup has 1 building with 2 groups, and 1 building with 1 group. The building with 1 group is seperate to the main building, with the exception that the keypad in the main building is assigned to all groups. Sounders are seperated per group.

Edited by xpertalarms
Link to comment
Share on other sites

38 minutes ago, xpertalarms said:

Yep all wired correctly, correct outputs assigned. I've done an output test too and that's all fine. Very strange.....

So your saying only alarm.condition fails to trigger out put?

Link to comment
Share on other sites

1 hour ago, xpertalarms said:

No bell delay programmed, ee tones are fine on both the keypad and ee horn for that group, but neither of them sound during alarm and the bells output type doesn't either

Can you get a fourth group to output correctly?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.