Steve Halifax Posted March 7, 2020 Share Posted March 7, 2020 hi the key as broke inside the enable control. have called chubb but they do not supply spares . anyone know where i could buy one or similar to replace. thank you Quote Link to comment Share on other sites More sharing options...
norman Posted March 7, 2020 Share Posted March 7, 2020 Sure someone will confirm but I think it's either this https://www.replacementkeys.co.uk/bkg-845-key.html Or this https://www.replacementkeys.co.uk/kentec-901-key.html?gclid=Cj0KCQiAqY3zBRDQARIsAJeCVxNgArOhxQ-J2_uLUuuP9-ZZN3XR_lSIW07-Xb0jkVkshHo8JbOVo5YaAsSWEALw_wcB Once you've removed the old one of course Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Steve Halifax Posted March 7, 2020 Author Share Posted March 7, 2020 thanks, just unsure if i can get the key out was hoping to buy the whole unit. thanks again for your help Quote Link to comment Share on other sites More sharing options...
norman Posted March 7, 2020 Share Posted March 7, 2020 Which zone master is it? Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Steve Halifax Posted March 7, 2020 Author Share Posted March 7, 2020 104a thanks Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted March 7, 2020 Share Posted March 7, 2020 Who made these for Chubb then? Was it Kentec? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.