al-yeti Posted March 2, 2020 Share Posted March 2, 2020 13 minutes ago, Eugene's DIY Den said: The panel I used is a pro version, I was lucky enough to get it from my electrical suppler. Apparently it's only supposed to be supplied to professional , not sure of the logic of this? Maybe they're afraid of reverse engineering? Maybe , you got details of who supplied to you? Quote Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 2, 2020 Author Share Posted March 2, 2020 (edited) 3 minutes ago, Logan said: I use orisec and you must be a registered installer to purchase thier equipment In case you're a burglar and hack in and remotely control the panel in the future? I presume that's what they're worried about. Edited March 2, 2020 by Eugene's DIY Den Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
norman Posted March 2, 2020 Share Posted March 2, 2020 33 minutes ago, Logan said: I use orisec and you must be a registered installer to purchase thier equipment That should be easy then.... Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
al-yeti Posted March 2, 2020 Share Posted March 2, 2020 55 minutes ago, Logan said: I use orisec and you must be a registered installer to purchase thier equipment Thought used enforcer , mini and all that? Quote Link to comment Share on other sites More sharing options...
MrHappy Posted March 2, 2020 Share Posted March 2, 2020 1 hour ago, Logan said: I use orisec and you must be a registered installer to purchase thier equipment did you get an adult to fill out the form ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 2, 2020 Author Share Posted March 2, 2020 I notice I get an error fault sometimes when I open my front door and the alarm goes off. The frame is swollen with all the rain so the door takes a lot of tugging and pushing to pull it open. Could this be due to the contacts being repeatedly opened and closed, sending multiple pulses to the panel instead of a single open signal? Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
MrHappy Posted March 2, 2020 Share Posted March 2, 2020 16 minutes ago, Eugene's DIY Den said: I notice I get an error fault sometimes when I open my front door and the alarm goes off. The frame is swollen with all the rain so the door takes a lot of tugging and pushing to pull it open. Could this be due to the contacts being repeatedly opened and closed, sending multiple pulses to the panel instead of a single open signal? tamper due to poor connections... 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
al-yeti Posted March 2, 2020 Share Posted March 2, 2020 28 minutes ago, Eugene's DIY Den said: I notice I get an error fault sometimes when I open my front door and the alarm goes off. The frame is swollen with all the rain so the door takes a lot of tugging and pushing to pull it open. Could this be due to the contacts being repeatedly opened and closed, sending multiple pulses to the panel instead of a single open signal? Put a surface mount on , not ideal may work better for you , if difficult to keep connection in frame Quote Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 2, 2020 Author Share Posted March 2, 2020 2 hours ago, MrHappy said: tamper due to poor connections... Connections are perfect, I always spend ages making them. No corrosion. Fault wasn't a tamper fault. Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 2, 2020 Author Share Posted March 2, 2020 1 hour ago, al-yeti said: Put a surface mount on , not ideal may work better for you , if difficult to keep connection in frame There's no movement of the sensors though, they're well fixed. What I'm wondering is what exactly "entry fault" means. Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.