al-yeti Posted March 1, 2020 Share Posted March 1, 2020 22 minutes ago, Eugene's DIY Den said: Ok, so setting spit entry time to zero solved the problem. Now there's no delay between internal sounder and external bell activating when the entry door is opened and code isn't entered before the entry delay times out. However I still have an issue with alarmed internal doors and PIRs not activating the alarm if the entry door is opened first and these sensors are activated before the entry delay times out. So for example I open an external door, panel starts beeping, I don't enter the code and I open an alarmed internal door. The internal sounder activates, but not the outside bell. (didn't check if there's a delay before it actually does) Are these zones walk through by default? Marked as access , not sure if they would do what your saying tho, under menu zone options Quote Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 1, 2020 Author Share Posted March 1, 2020 1 hour ago, al-yeti said: Marked as access , not sure if they would do what your saying tho, under menu zone options Checked all the zone types. All "alarm" except a panic zone and entry/exit door zone. Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 1, 2020 Author Share Posted March 1, 2020 Checked all the zone types. All "alarm" except a panic zone and entry/exit door zone. However the zone options are "inhibit". I thought this function on a zone was for allowing the panel to be armed even if the zone is active? Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
al-yeti Posted March 1, 2020 Share Posted March 1, 2020 37 minutes ago, Eugene's DIY Den said: Checked all the zone types. All "alarm" except a panic zone and entry/exit door zone. However the zone options are "inhibit". I thought this function on a zone was for allowing the panel to be armed even if the zone is active? Zone options "access" Not talking about zone type You would want to keep a PIR with access option as yes if it's in the entry route , but perhaps the door needs to be turned off , but I didn't think it would do what your describing but maybe Quote Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 1, 2020 Author Share Posted March 1, 2020 (edited) 1 hour ago, al-yeti said: Zone options "access" Not talking about zone type You would want to keep a PIR with access option as yes if it's in the entry route , but perhaps the door needs to be turned off , but I didn't think it would do what your describing but maybe The door isn't in the entry route and I want it to trigger the alarm immediately when opened, so is inhibit the correct option? The other options are access, excl from part set A, excl from part set B, double knock, soak, chime, 24 hour, perimeter and remote test. Edited March 1, 2020 by Eugene's DIY Den Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
al-yeti Posted March 1, 2020 Share Posted March 1, 2020 53 minutes ago, Eugene's DIY Den said: The door isn't in the entry route and I want it to trigger the alarm immediately when opened, so is inhibit the correct option? The other options are access, excl from part set A, excl from part set B, double knock, soak, chime, 24 hour, perimeter and remote test. You read what I am saying lol? Is the internal door set for access option in menu set to yes or no? Quote Link to comment Share on other sites More sharing options...
Eugene's DIY Den Posted March 1, 2020 Author Share Posted March 1, 2020 Not sure what you mean. The zone type for the internal door is "alarm" and the zone option is "inhibit". Quote Talking Tools, a Facebook group for discussing anything tool/DIY related. Link to comment Share on other sites More sharing options...
al-yeti Posted March 1, 2020 Share Posted March 1, 2020 48 minutes ago, Eugene's DIY Den said: Not sure what you mean. The zone type for the internal door is "alarm" and the zone option is "inhibit". Ok but if you scroll through you will find chine , access, blah Quote Link to comment Share on other sites More sharing options...
MrHappy Posted March 1, 2020 Share Posted March 1, 2020 48 minutes ago, Eugene's DIY Den said: Not sure what you mean. buy a dog... 1 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
al-yeti Posted March 1, 2020 Share Posted March 1, 2020 16 minutes ago, MrHappy said: buy a dog... That's a menu option for sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.