bowlingman Posted February 19, 2020 Author Share Posted February 19, 2020 Thank you all for your advice. I have decided I am going to up date and thanks to datadiffusion suggestions I am considering a Texecom Premier Elite in polymer caa-0026 It allows 2 areas and that could work for me. First I would like to study the installation manual so as to familiarise myself with the wiring etc req. how and where can I obtain one please. Secondly where would I find the best supplier please. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 19, 2020 Share Posted February 19, 2020 8 minutes ago, bowlingman said: First I would like to study the installation manual so as to familiarise myself with the wiring etc req. how and where can I obtain one please. Secondly where would I find the best supplier please. google.... are planning to run your 2 keypads, zone expanders, external sounder(s) & internal speaker all off the endstation ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
bowlingman Posted February 19, 2020 Author Share Posted February 19, 2020 Yes however I now plan to use only one kp adjacent to endstation, only two expanders one at a cable distance around 10 meters and the other at around 15 meters. Expander one will have two contacts and a dt on it, expander two will have two contacts. The endstation and kp will have six movement detectors plus three contacts plus pa button. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 19, 2020 Share Posted February 19, 2020 How many speaker or external Sounders are you using? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
bowlingman Posted February 19, 2020 Author Share Posted February 19, 2020 41 minutes ago, MrHappy said: How many speaker or external Sounders are you using? One internal speaker One external sounder Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted February 19, 2020 Share Posted February 19, 2020 Panel and two expanders will most likely be over for two expanders. Would be thinking PSU200XP. Quote Link to comment Share on other sites More sharing options...
bowlingman Posted February 19, 2020 Author Share Posted February 19, 2020 I was not expecting that. Is the ps small on the endstation Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 19, 2020 Share Posted February 19, 2020 its also standby time. You can calculate the approx demand plus switched mode power supplies dont deliver over their rating and the texecom ones have issues anyway Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
bowlingman Posted February 19, 2020 Author Share Posted February 19, 2020 What ps would be best and how should I wire it into the system please Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted February 19, 2020 Share Posted February 19, 2020 It's not the power supply current it's mainly the standby time. You would normally calculate current for alarm and quiescent condition for all of the kit and measure it as part of the design. i gave you the exact model number above. The SMPS is standard on all the metal cab Premier kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.