Timmymeads Posted February 11, 2020 Share Posted February 11, 2020 (edited) Hi, I revived my ADEMCO ACCORD 8 system with a fuse as must have blown it when disconnected key pad some time ago. Everything seems to work fine. The x3 PIR flash red on movement. The key pad is powered and I know the engineer code and user code. Although when I enter user code + 1 it starts to beep then doesn’t stop. The zones 5,6,7 are red and omitted I believe. Not sure if I did a factory reset. When bringing the system back to life. I have the manual .... Edited February 11, 2020 by MrHappy removed links Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 11, 2020 Share Posted February 11, 2020 Also does this really need a new topic?? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Timmymeads Posted February 11, 2020 Author Share Posted February 11, 2020 (edited) These manuals are searchable by anyone on the World Wide Web. Why the issue? If you don’t have anything supportive to say please don’t contribute anything. Off topic: Yes as everyone who was supporting went off topic Edited February 11, 2020 by Timmymeads 1 3 Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 11, 2020 Share Posted February 11, 2020 1 minute ago, Logan said: Its because if someone uses a engineer manual we provide to mess with someone elses system to disable it (eg to rob a shop) we dont want to be responsible for assisting a criminal no it ain't... 7 minutes ago, Timmymeads said: These manuals are searchable by anyone on the World Wide Web. Why the issue? the document is the manufactures copywrite, yrs ago there was legal hoo-ha over TSI having engineer manuals on line or linking to engineering manuals which is why I removed your links 7 minutes ago, Timmymeads said: If you don’t have anything supportive to say please don’t contribute anything. buy a dog.... Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Timmymeads Posted February 11, 2020 Author Share Posted February 11, 2020 I don’t think people really can be bothered with what you have stated. Instead you have just wanted to be differcult... and proven unhelpful - Take your power elsewhere Logan - and remember with great ‘power, comes..... not! 1 2 Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 11, 2020 Share Posted February 11, 2020 (edited) 21 hours ago, Timmymeads said: Take your power elsewhere Logan Yeah Logan go away with your power Edited February 12, 2020 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted February 12, 2020 Share Posted February 12, 2020 13 hours ago, Logan said: What power. You are the admin not me Logan run 13 hours ago, Timmymeads said: I don’t think people really can be bothered with what you have stated. Instead you have just wanted to be differcult... and proven unhelpful - Take your power elsewhere Logan - and remember with great ‘power, comes..... not! Confused how is it difficult if there available to you and a forum has its own rules that abides by , simple really So buy a dog or ask a question Quote Link to comment Share on other sites More sharing options...
norman Posted February 12, 2020 Share Posted February 12, 2020 Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
norman Posted February 12, 2020 Share Posted February 12, 2020 Woosh! Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
MrHappy Posted February 12, 2020 Share Posted February 12, 2020 1 hour ago, Logan said: That does not look like me one bit yeah your frock is green... Quote Mr Veritas God Link to comment Share on other sites More sharing options...
MrHappy Posted February 12, 2020 Share Posted February 12, 2020 robin the frog ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
datadiffusion Posted February 12, 2020 Share Posted February 12, 2020 (edited) I prefer Ethel The Frog Edited February 12, 2020 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
MrHappy Posted February 12, 2020 Share Posted February 12, 2020 its funny how one thing links to another... 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
datadiffusion Posted February 13, 2020 Share Posted February 13, 2020 And now for something completely different... Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Timmymeads Posted February 23, 2020 Author Share Posted February 23, 2020 Hi Logan, swwo I know engineer code and a user code when I put both codes in the alarm sets, PIR 5/6/7 are all red lit and day button is flashing green and power green. But it just continues to beep and not set? any ideas? 60415630111__75584551-E5B4-4D01-A726-9B8D01A418B8.MOV Quote Link to comment Share on other sites More sharing options...
PeterJames Posted February 23, 2020 Share Posted February 23, 2020 Open and shut the front door, see if it arms, its probably progged as final set Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 23, 2020 Share Posted February 23, 2020 16 minutes ago, PeterJames said: Open and shut the front door, see if it arms, its probably progged as final set ? With pirs lit? And day light flashing? Quote Link to comment Share on other sites More sharing options...
PeterJames Posted February 23, 2020 Share Posted February 23, 2020 2 minutes ago, al-yeti said: ? With pirs lit? And day light flashing? Day light is flashing because its arming, he said earlier that 5 6 and 7 were omitted Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 23, 2020 Share Posted February 23, 2020 15 minutes ago, PeterJames said: Day light is flashing because its arming, he said earlier that 5 6 and 7 were omitted Ah ok , can't.be reading all that again Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 23, 2020 Share Posted February 23, 2020 17 minutes ago, al-yeti said: Ah ok , can't.be reading all that again did he not get the dog ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
al-yeti Posted February 23, 2020 Share Posted February 23, 2020 1 hour ago, MrHappy said: did he not get the dog ? Maybe, you will have to read back tho Quote Link to comment Share on other sites More sharing options...
Timmymeads Posted February 23, 2020 Author Share Posted February 23, 2020 yes tried opening and shutting the door and also tried making it so the exit beep is 10 seconds and nothing changes?! So frustrating Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 23, 2020 Share Posted February 23, 2020 30 minutes ago, Timmymeads said: yes tried opening and shutting the door and also tried making it so the exit beep is 10 seconds and nothing changes?! So frustrating It's scrap seriously Quote Link to comment Share on other sites More sharing options...
Timmymeads Posted February 23, 2020 Author Share Posted February 23, 2020 It’s works fine for me - Why pay out when I have a functional alarm just with a few teething issues - Can anyone figure out? I must have done a master reset somehow although I didn’t ommit 5,6,7 Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 23, 2020 Share Posted February 23, 2020 15 minutes ago, Timmymeads said: Can anyone figure out? nah, @logan is your only hope.... Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.