bev001 Posted February 5, 2020 Share Posted February 5, 2020 Good Afternoon All, I purchased a second hand Visonoc ADT PM-360R but I cannot get into the installer menu to add my devices. I was wondering if anyone has any advice or could point me in the right direction? Thank you Tom Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted February 5, 2020 Share Posted February 5, 2020 We don't allow defaulting information here. I can only suggest you ask the person you bought it from. Also do note that the ADT Visonic panels only accept ADT devices, they run on a slightly different frequency I believe. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 5, 2020 Share Posted February 5, 2020 Is it frequency or is it just unqiue string on the device ID number? Either way I suspect the OP has wasted their money if they can't return the item or already have a house full of ADT devices. In which case the eBayers of these ADT models all claim they will offer support as far as getting to the app screen if not any further. Quote UK Visonic devices sporting the 868-1 code will not work. I suspect the 868 is the frequency, and '1' means 'non-ADT Devices' rather than a change in frequency. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
norman Posted February 5, 2020 Share Posted February 5, 2020 Yes the frequency (only) is different. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted February 5, 2020 Share Posted February 5, 2020 From what I know it is frequency they are all still 868, so a subtle change. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 5, 2020 Share Posted February 5, 2020 Blimey really, what an odd and presumably more expensive way of doing it. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted February 5, 2020 Share Posted February 5, 2020 5 hours ago, datadiffusion said: Blimey really, what an odd and presumably more expensive way of doing it. Not really remember Tyco own both so small tweak is probably easy Quote Link to comment Share on other sites More sharing options...
bev001 Posted February 5, 2020 Author Share Posted February 5, 2020 10 hours ago, sixwheeledbeast said: We don't allow defaulting information here. I can only suggest you ask the person you bought it from. Also do note that the ADT Visonic panels only accept ADT devices, they run on a slightly different frequency I believe. Thanks everyone for responding. Yes i have a number of ADT devices 868-0 ready to be installed. The installer menu requires a pin code, this is what I am stuck on. I see that it is not allowed to be disclosed on this forum, maybe someone could let me know how I might find it? Quote Link to comment Share on other sites More sharing options...
bev001 Posted February 6, 2020 Author Share Posted February 6, 2020 37 minutes ago, Logan said: The pin code is the engineer code. You can default it BUT WE CAN NOT GIVE THIS INFO ON THIS FOURM for security reasons Polite response only, thanks 1 Quote Link to comment Share on other sites More sharing options...
norman Posted February 6, 2020 Share Posted February 6, 2020 7 hours ago, bev001 said: Polite response only, thanks Nothing impolite about the response and it's the only one you will get here I'm afraid. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
al-yeti Posted February 6, 2020 Share Posted February 6, 2020 8 hours ago, Logan said: The pin code is the engineer code. You can default it BUT WE CAN NOT GIVE THIS INFO ON THIS FOURM for security reasons You sure your not someone's business partner ? Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 6, 2020 Share Posted February 6, 2020 (edited) 7 hours ago, bev001 said: Polite response only, thanks Basically capitals here is not always rude or regarded as shouting The gorillas here claim someone is always on super tenants hence why capitals gets switched on In this forum no defaulting info is given out in public or in private (pm) good rule I think but then I always lock all the panels so it wouldn't help you anyway Edited February 6, 2020 by al-yeti Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 6, 2020 Share Posted February 6, 2020 24 minutes ago, al-yeti said: Basically capitals here is not always rude or regarded as shouting Not always Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted February 6, 2020 Share Posted February 6, 2020 3 hours ago, datadiffusion said: Not always STOP THAT Quote Link to comment Share on other sites More sharing options...
Dazza Posted July 2, 2022 Share Posted July 2, 2022 Your answer to resetting the 360r systems is right here. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 2, 2022 Share Posted July 2, 2022 Dazza please dont link to your own stuff on crypto Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.