Jump to content
Security Installer Community

Optima Alarm Upgrade


Gareth_B

Recommended Posts

I have an existing (old school) Optima alarm panel with 2 zones (wired PIR's + contact points).

 

I am looking to replace the panel with a simple alarm panel (no smart/wireless PIR inputs needed). I am looking for it to have the ability to arm/disarm using a remote control or a key fob.

(The alarm will be used by elderly people, so the key fob/remote should be much easier than entering the code each time).

 

Any thoughts on a suitable simple systems are welcome.

Link to comment
Share on other sites

You could use a Pyronix enforcer, it has two wired zone inputs (if you don't need to wire the external bell box) - note if you use the two wired inputs and want an external bell this would have to be wireless

It has wireless fobs / and or prox tokens & is fairly simple to use

 

Or another suggestion would be a texecom 12W (or similar) , fairly similar to the enforcer (probably better IMHO) it has at least 4 wired zones, it is wireless capable for expansion, has wireless fobs / prox tokens

 

Hope the above helps

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.