Jump to content
Security Installer Community

Recommended Posts

Hi all

I have a little intercoms issue with a videx vx2200 I've been tasked with looking into, I'm more security so have only done a few door entry / Intercoms bits to date. I have a handset that isn't sounding when buzzed from the main panel or doesn't unlock the door. Supposedly worked fine up until recently. 

TIA

20191009_112133.jpg

20191009_111006.jpg

20191009_104851.jpg

Share this post


Link to post
Share on other sites

I guess loose wires are yourself?

 

It'll probably be the big green handset switch causing the issue, as usually the unit will not ring if 'off hook'.

 

However it appears to be some sort of digital unit so could be anything :)


So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Share this post


Link to post
Share on other sites

This was how it was when I opened it up other then prying the cables apart a little to do some a visual inspection. You might be onto something tho regards the green bit as their was a piece of plastic which fell out when I opened it up which would act as a connecting part when the handset was on. 

Share this post


Link to post
Share on other sites

I would probably start by proving the headset by swapping them over, then maybe check the wiring if the fault follows location not equipment.

Share this post


Link to post
Share on other sites

And if you do swaps don't forget to change the unit ID :)

 

Shame it's digital as Fermax do a brilliant 'universal' unit (model 3399) that replaces about 500 different analogue makes, never had to visit the same job twice ;)

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Share this post


Link to post
Share on other sites

Yep, or 'phone no.' as they literally put it :)


So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Share this post


Link to post
Share on other sites

Probably the cradle off hook, could readdress it to another phone on the system and see if it rings when you call that number.

Only using the two address lines- check they are the right way round maybe

Edited by kwc

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.