norman Posted July 16, 2019 Share Posted July 16, 2019 These These used later had an LED... (just visible @ the bottom of the button) Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
MrHappy Posted July 16, 2019 Share Posted July 16, 2019 42 minutes ago, datadiffusion said: Elmdene did one too, I've got one here without the 'key', no idea why I keep it on stock. I had an 'exit terminate' parts bin sort out today amongst other things (30kg of stuff to Logan ) 5 x Elmdene ET's with the 12V red led 1 x Elmdene magnetic ET One small type Arnie One large arnie One Knights surface keyswitch (not really ET but sort of feels like the right bin) 5 x chinktat but look nice ET buttons on flush stainless plates (this was leftovers for a posh Bath flats job, all monitored by the 24/7 concierge, AFIAK since we never went back the concierge is long gone...) I think I've a dantech exit terminate button on stock.... Quote Mr Veritas God Link to comment Share on other sites More sharing options...
datadiffusion Posted July 16, 2019 Author Share Posted July 16, 2019 https://www.dantech.uk.com/DA123.html That's one hell of a list of variants! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted July 16, 2019 Share Posted July 16, 2019 I have always rated Dantech stuff TBH. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 16, 2019 Author Share Posted July 16, 2019 (edited) Used their relays a few times, and those tampered alarm wire to armoured boxes they sell, you could make your own but buying theirs is much easier! https://www.dantech.uk.com/DA318.html Though, I like the way they obviously have about 20 years stock of old-shape MK metalclad boxes to get through before they move on to the modern ones! Edited July 16, 2019 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted July 16, 2019 Share Posted July 16, 2019 Handy for when you need to use conduit. I always prefer to lose the wiring in the cavity where feasible, less chance of some muppet smashing your work up with a FLT. Most use Dantech for CCTV PSU's Quote Link to comment Share on other sites More sharing options...
al-yeti Posted July 16, 2019 Share Posted July 16, 2019 7 hours ago, datadiffusion said: So in my bundle of **** that some poor guy was no doubt delighted to offload AND get paid for it, there was this DA product, which I never knew existed... What's special about it is that its got it's own miniature speaker so you can hear the tones from outside - I've never seen that before. And that's about it really. Another one that didn't get out much Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 18, 2019 Author Share Posted July 18, 2019 (edited) Looks like you could connect up the special order tamper or NC contact yourself if you wanted to Edited July 18, 2019 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
PeterJames Posted July 18, 2019 Share Posted July 18, 2019 Those DA buttons were good, Id forgotten all about them till now, brings memories flooding back running a 12 core to a speaker to pick up the keypad door contact and ET switch 6 for the RKP 2 for the ET 4 for the MC, the speaker sound and the ET soud wer all wired from two of the terminals of the RKP. It was okay doing this for commercials but a bugger to hide the cables for resi 1 Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 18, 2019 Author Share Posted July 18, 2019 34 minutes ago, PeterJames said: brings memories flooding back 1 1 Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.