Jump to content
Security Installer Community
mark holland

connecting additional keypad pyronix euro 46 v10

Recommended Posts

i just got a new pyronix euro 46v10 with a additional keypad i have wired them both together in the same place on the motherboard in the control  panel  but when i powered up the system the keypads would not let me do anything even the manager code would not work and the alarm went off .  also my DIGI-Wifi / xa does not light up . any ideas??? 

Share this post


Link to post
Share on other sites

You need to address the keypads then assign the new address as a keypad 

Share this post


Link to post
Share on other sites

hi Abbz so your saying you cannot twist the main and the additional  keypads wiring together and put in the same place on the board or do you have to programme the main keypad first then add the additional  keypad after???? .i have got one of the keypads working now by removing the additional keypad from the control board . but my digi - wifi /xa is still  not been recognised in the communication menu on the keypad . will i need to do a clear start  and start again ??? ps thanks for your help

Share this post


Link to post
Share on other sites
4 hours ago, mark holland said:

hi Abbz so your saying you cannot twist the main and the additional  keypads wiring together and put in the same place on the board or do you have to programme the main keypad first then add the additional  keypad after???? .i have got one of the keypads working now by removing the additional keypad from the control board . but my digi - wifi /xa is still  not been recognised in the communication menu on the keypad . will i need to do a clear start  and start again ??? ps thanks for your help

Wiring can be common

 

Addressing is give a number or letter like a house having a door number or name, so the control panel knows who is who like a postman needs to know what address to goto

 

Not sure about the comes device tho lol I don't use the panel  but if you give up I will have it 

Share this post


Link to post
Share on other sites

Your working keypad should be address 0.

Got to assign keypads and readers and select keypad address 1. Make this a keypad.

Then you have to access a hidden menu on the non working keypad and address it as 1 - Admin - ok to give out this info?

That should get the 2nd keypad working.

 

The panel has to be powered up on mains first to recognise the Digi WiFi so it shows in the menu.

  • Upvote 1

Share this post


Link to post
Share on other sites

Thanks James.

 

In that case, press and hold D till it says enter security code.

Put in 2000.

Press no till you get to address and make it 1

Press A to save 

Keypad should be working.

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.