Jump to content
Security Installer Community

Accenta 7 quick power cut alarm/then no status lights?


Recommended Posts

19 hours ago, james.wilson said:

Out of interest your using modern ios tech to post about your really old alarm, would you be interested in keeping your security system up to date for half what you pay to apple? 

I still say a good, well maintained, fit for purpose system wouldn't need ripping out. People are too quick to add to the E-waste pile IMO.

It's easy to say you swap your car or phone more regularly than your alarm but most of this consumer stuff is designed with a short lifespan in mind and you are trapped to a platform.

A lot of my electronic equipment is 10 years old but its well looked after, I'd only plan to replace it when it's unserviceable.

  • Like 1
  • Upvote 1
Link to comment
Share on other sites

38 minutes ago, sixwheeledbeast said:

I still say a good, well maintained, fit for purpose system wouldn't need ripping out. People are too quick to add to the E-waste pile IMO.

It's easy to say you swap your car or phone more regularly than your alarm but most of this consumer stuff is designed with a short lifespan in mind and you are trapped to a platform.

A lot of my electronic equipment is 10 years old but its well looked after, I'd only plan to replace it when it's unserviceable.

A man after my own heart, I hate seeing stuff thrown out just for the sake of it. That's why I love restoring Vintage electronics.

Customers Love us, Intruders Hate us.

Link to comment
Share on other sites

2 hours ago, Specialist said:

A man after my own heart, I hate seeing stuff thrown out just for the sake of it. That's why I love restoring Vintage electronics.

As you can see people don't agree. It's all down to if you see it as a box pushing game or a service industry IMO.

You can push as many shiny new boxes as you want but customers want a good service, it's the peace of mind and trust in your system and installer people should focus on.

Edited by sixwheeledbeast
typo
Link to comment
Share on other sites

To me, shiny new boxes are all well and good in their place. i.e when I definitely can't bring something back to life.

Maybe I'm just a masochist :)

Customers Love us, Intruders Hate us.

Link to comment
Share on other sites

7 hours ago, Specialist said:

A man after my own heart, I hate seeing stuff thrown out just for the sake of it. That's why I love restoring Vintage electronics.

Your room must be like junk yard , growing up mine was a mess still don't have time to fix everything 

 

 

Link to comment
Share on other sites

4 hours ago, al-yeti said:

Your room must be like junk yard , growing up mine was a mess still don't have time to fix everything 

 

 

Nah, you forget: I've had plenty of time to fix the stuff ;)

Edited by Specialist

Customers Love us, Intruders Hate us.

Link to comment
Share on other sites

The engineer has been and it was the bloke who's been before and said we had been locked out because of the power cut.

Already has his battery with him, went to the main box and asked me to put my code in when the alarm went off. Came back down walk tested all the sensors and that was it fixed. Said all our settings, code etc will be the same.

 

So as people suggested it was the battery that needed replacing.

 

In theory is this something i could do in the future as it was obviously my code and not the engineer code when he opened the box and the tamper switch went off? Battery needed is a rechargeable 12v battery in region of 1.2 to 6Ah.

 

And even worse worse case scenario the alarm only goes off for 20mins on a Accenta 6?

 

Thank you for all the help :)

Link to comment
Share on other sites

4 hours ago, jezthomp said:

The engineer has been and it was the bloke who's been before and said we had been locked out because of the power cut.

Already has his battery with him, went to the main box and asked me to put my code in when the alarm went off. Came back down walk tested all the sensors and that was it fixed. Said all our settings, code etc will be the same.

 

So as people suggested it was the battery that needed replacing.

 

In theory is this something i could do in the future as it was obviously my code and not the engineer code when he opened the box and the tamper switch went off? Battery needed is a rechargeable 12v battery in region of 1.2 to 6Ah.

 

And even worse worse case scenario the alarm only goes off for 20mins on a Accenta 6?

 

Thank you for all the help :

Hi Jez: Yes, from what you've said then it's quite feasible for you to change the battery yourself in the future. Did he take a meter up into the attic to check charging voltage / current ?.

 

Sorry: Not sure what you mean by even worse case scenario, bell only sounds for 20 minutes on the Accenta 6 ?. That's more than enough time to deter a burglar and really annoy your neighbours.

 

Edited by Specialist

Customers Love us, Intruders Hate us.

Link to comment
Share on other sites

Sorry was trying to do several things at once, your Installer should have set the sounder cut off time to no more than 15 minutes.

Customers Love us, Intruders Hate us.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.