Gabs Posted April 23, 2019 Author Share Posted April 23, 2019 6 minutes ago, james.wilson said: It wasn't lithium based back then I know, so there is little risk of Ni-Cd causing a fire? That is what I was going to design my SAB with? Quote Link to comment Share on other sites More sharing options...
james.wilson Posted April 23, 2019 Share Posted April 23, 2019 Ni cads can take a lot of abuse when I used to race model cars you could put more into them than so called fast charging today. Used to thermal charge at a stupid temp limit. Used to put the thermocouple on the pack. Ni mh was a good compromise of capacity etc but I'd go nicad on a bell if I wanted to design one Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Gabs Posted April 23, 2019 Author Share Posted April 23, 2019 Yeah, I have a 6v one, stolen from the PCB of my dead hexagon Modern Alarms bell box, was happy for me to put in 12v all day, drew no current, didn't get hot and it held a charge fine, probably how most SABs do the charging, constantly cutting power into the battery, through the Hold-Off Voltage Quote Link to comment Share on other sites More sharing options...
MrHappy Posted April 27, 2019 Share Posted April 27, 2019 @gabs you seen this tat before? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted April 27, 2019 Share Posted April 27, 2019 Red for bed.. Quote Link to comment Share on other sites More sharing options...
Gabs Posted April 27, 2019 Author Share Posted April 27, 2019 (edited) 14 minutes ago, MrHappy said: @gabs you seen this tat before? Avanti? Never seen or used one, why? The IC is Philips, not seen that before. And the T A D B Bell connections make me think of ADE Edited April 27, 2019 by Gabs Quote Link to comment Share on other sites More sharing options...
MrHappy Posted April 27, 2019 Share Posted April 27, 2019 (edited) 10 minutes ago, Gabs said: Avanti? Never seen or used one, why? After selling ADE the names behind it had a second go with MDT which didn't do so well The PCB is marked as http://www.gspkcircuits.ltd.uk Edited April 27, 2019 by MrHappy Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Gabs Posted April 27, 2019 Author Share Posted April 27, 2019 1 hour ago, MrHappy said: After selling ADE the names behind it had a second go with MDT which didn't do so well The PCB is marked as http://www.gspkcircuits.ltd.uk ADE Sold to Novar and in turn to Honeywell? Funny how Honeywell own them, yet the newest Accentas still say ADE on them. I would be interested to get my oscilloscope on that Avanti and compare the serial data to an Accentas. I bet they would be the same or similar. So, GSPK make the boards, I wonder if they are also involved in the circuit design? Or thaw as done by whoever previously worked at ADE and left when they were sold? Quote Link to comment Share on other sites More sharing options...
al-yeti Posted April 27, 2019 Share Posted April 27, 2019 5 hours ago, sixwheeledbeast said: Red for bed.. I still sell the idea with hkc Pete red tags do well for part set lol Quote Link to comment Share on other sites More sharing options...
MrHappy Posted May 4, 2019 Share Posted May 4, 2019 (edited) On 21/04/2019 at 11:33, MrHappy said: Cqr intrega was the 1st complete plastic Ewd I recall... ripped this of the wall on Friday- Edited May 4, 2019 by MrHappy Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.