Jump to content
Security Installer Community

Access Control System Wiring


neon555

Recommended Posts

Hi guys,

 

I've purchased myself a simple access control system and I'm fairly confident I know what I need to do.

The power leads appear to not matter how they are connected (which does to + and -, as long as they are connected).

One thing I want to check before I start is what type of wire I should be using to connect the components. The "Power Supply Control" is a K80 (see attached picture).

 

The device will be outputting 12v DC (3A). I know this is not much different from the alarm system I installed a year or two ago, but I am unsure if I can use the same cable. The alarm cable is 8 core cable, so presumably I would slice it open and use a single strand - as per each required wire, but whenever something comes to electrics I always like to be 100% sure.

Will I be okay to use the wire in the manner I have described. Should I use all 8 cables per connection or should I be using a totally different wire entirely (taking an AC cable and using an individual strand of that) OR shall I use something else entirely. If you could include any information - as well as possibly links - to the best wire to use, it would be greatly appreciated.

 

Many thanks for your continued support guys,

John

Power Supply Control - K80.jpg

Link to comment
Share on other sites

3 hours ago, neon555 said:

Hi guys,

 

I've purchased myself a simple access control system and I'm fairly confident I know what I need to do.

The power leads appear to not matter how they are connected (which does to + and -, as long as they are connected).

One thing I want to check before I start is what type of wire I should be using to connect the components. The "Power Supply Control" is a K80 (see attached picture).

 

The device will be outputting 12v DC (3A). I know this is not much different from the alarm system I installed a year or two ago, but I am unsure if I can use the same cable. The alarm cable is 8 core cable, so presumably I would slice it open and use a single strand - as per each required wire, but whenever something comes to electrics I always like to be 100% sure.

Will I be okay to use the wire in the manner I have described. Should I use all 8 cables per connection or should I be using a totally different wire entirely (taking an AC cable and using an individual strand of that) OR shall I use something else entirely. If you could include any information - as well as possibly links - to the best wire to use, it would be greatly appreciated.

 

Many thanks for your continued support guys,

John

Power Supply Control - K80.jpg

Alarm cable will do 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.