RevolvingSteve Posted January 19, 2019 Author Share Posted January 19, 2019 1 hour ago, al-yeti said: Correct , with resistors in place Is it a door contact with no tamper ? Good bloke you can then also get an RF card later I believe and have wireless zones , unless you already have that Already have the RF card, see below! 19 minutes ago, al-yeti said: Sounds ok Great. All seems done but I now have a tamper on the RF PORTAL 105. I don't have any RF Detectors connected? Quote Link to comment Share on other sites More sharing options...
al-yeti Posted January 19, 2019 Share Posted January 19, 2019 33 minutes ago, RevolvingSteve said: Already have the RF card, see below! Great. All seems done but I now have a tamper on the RF PORTAL 105. I don't have any RF Detectors connected? Did you fit the spring in the portal? Quote Link to comment Share on other sites More sharing options...
GalaxyGuy Posted January 19, 2019 Share Posted January 19, 2019 In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. Quote Link to comment Share on other sites More sharing options...
RevolvingSteve Posted January 20, 2019 Author Share Posted January 20, 2019 On 19/01/2019 at 20:47, GalaxyGuy said: In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. Could you elaborate? Im not at the house until tomorrow but will check it out. On 19/01/2019 at 18:28, al-yeti said: Did you fit the spring in the portal? Again, you'll have to elaborate a little... Quote Link to comment Share on other sites More sharing options...
norman Posted January 20, 2019 Share Posted January 20, 2019 I love galaxy but that had to be the fugliest rkp available. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
RevolvingSteve Posted January 20, 2019 Author Share Posted January 20, 2019 5 minutes ago, norman said: I love galaxy but that had to be the fugliest rkp available. You mean the panel or the install Its on a temp wall for now until the room is done Quote Link to comment Share on other sites More sharing options...
norman Posted January 20, 2019 Share Posted January 20, 2019 No, I meant the actual design of it, it's hideous and looks like a school electronics project. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
RevolvingSteve Posted January 21, 2019 Author Share Posted January 21, 2019 On 19/01/2019 at 20:47, GalaxyGuy said: In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. Thats the only wire I have connecting the RF to the board Quote Link to comment Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 1 hour ago, RevolvingSteve said: Thats the only wire I have connecting the RF to the board Because it's in main box fit jumper next to the top switch Quote Link to comment Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 On 19/01/2019 at 20:47, GalaxyGuy said: In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. As Mr galaxy said Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.