MrHappy Posted November 21, 2018 Share Posted November 21, 2018 31 minutes ago, sixwheeledbeast said: All the SAB modules I used in the past where dipped, surprised to see one without. Looks like a thin sprayed coating I recal recall aritech ones filled with resin Dragon ? with thin coating & ADE one with a even thiner coating Google images have very few pic of bell mods Quote Mr Veritas God Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted November 22, 2018 Share Posted November 22, 2018 Like a thick black potting compound the ones I recall Quote Link to comment Share on other sites More sharing options...
Jack b Posted May 30, 2019 Share Posted May 30, 2019 On 21/11/2018 at 19:47, Gabs said: The idea was just for a microswitch to go straight to to SCB of my Accenta panel, I could route it through my SAB module, but it would just be two tracks, from one terminal block to another. Could be done with standard 6 core wire, too. 2 for the Tamper 2 for the Hold Off voltage 2 for the Siren I think it would be 2 for hold off and the other two for tamp return and trigger, usually an SCB module would use the bell box battery to run the bell and a SAB module uses a trigger voltage to power the bell. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.