Jump to content
Security Installer Community
jonnas

Pyronix Proximity tags

Recommended Posts

Hi guys

 

Having problem with programming proximity tags for the Enforcer V10.

The tags are very thin and shaped like an egg, have been told that these are the correct for the Enforcer.

 

Anyone point me in the right direction just in case I am doing something wrong ?

 

Many thanks

pyronix_etag_5_pack.jpg

Share this post


Link to post
Share on other sites

Hi

 

Thanks for the reply.

I have been following the manual and been trying to program under the managers menu, when you get the option to either put in a code or present a tag I have managed to set up a user by entering a code, but if I want to set  up another user with a tag, the tag is not recognised, basically nothing happens.

 

Share this post


Link to post
Share on other sites

The pic looks like the correct tags.

Does it beep when you hold the tag up?

Share this post


Link to post
Share on other sites

I'll ask the obvious, are you holding the tag up to the top right of the screen?

 

When you add a user, it says enter code then you present tag. Is that what you are doing?

Share this post


Link to post
Share on other sites

There were a few buggy versions of the enforcer where the system speaker would intermittantly induce a voltage in the tag reader coil causing a code guessing FA.

At the time pyronix tech support were suggesting the "fix" was to disconnect the tag reader from the pcb. I declined to do this and RMAd the panel, but perhaps your installer followed this advice?

 

Oh hang on, i see its v10, i think this was 9 and below.

Edited by petrolhead
V10

Share this post


Link to post
Share on other sites
5 hours ago, jonnas said:

have been told that these are the correct for the Enforcer.

 

genuine tags from pyronix ?


busy twisting coloured wires & hanging off ladders....

Share this post


Link to post
Share on other sites

They look like castle fobs but have been told that some older third party fobs do not work on v10


Any comments / opinions posted are my opinion only and do not represent those of my employer or Company

Share this post


Link to post
Share on other sites
3 hours ago, petrolhead said:

There were a few buggy versions of the enforcer where the system speaker would intermittantly induce a voltage in the tag reader coil causing a code guessing FA.

At the time pyronix tech support were suggesting the "fix" was to disconnect the tag reader from the pcb. I declined to do this and RMAd the panel, but perhaps your installer followed this advice?

 

Oh hang on, i see its v10, i think this was 9 and below.

Similar thing on the older version of the quantam70 hkc, newer versions have had hardware fix , older versions would I terfere with reading the process tag on entry or when a constant tone came through the speaker 

Share this post


Link to post
Share on other sites

We had problems with Pyronix fobs recently, ours worked for the older castle and the hard wired products, but they didnt work for the newer Pyronix products. We found that another password has been added to the newer fobs in order for them to work. Maybe something Hik did ? We sussed the new password and reprogrammed our fobs so problem solved. We can now produce a fob that works with all panels which saves our engineers carrying loads of different brands 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.