Jump to content
Security Installer Community

Pyronix Proximity tags


jonnas

Recommended Posts

3 hours ago, petrolhead said:

There were a few buggy versions of the enforcer where the system speaker would intermittantly induce a voltage in the tag reader coil causing a code guessing FA.

At the time pyronix tech support were suggesting the "fix" was to disconnect the tag reader from the pcb. I declined to do this and RMAd the panel, but perhaps your installer followed this advice?

 

Oh hang on, i see its v10, i think this was 9 and below.

Similar thing on the older version of the quantam70 hkc, newer versions have had hardware fix , older versions would I terfere with reading the process tag on entry or when a constant tone came through the speaker 

Link to comment
Share on other sites

We had problems with Pyronix fobs recently, ours worked for the older castle and the hard wired products, but they didnt work for the newer Pyronix products. We found that another password has been added to the newer fobs in order for them to work. Maybe something Hik did ? We sussed the new password and reprogrammed our fobs so problem solved. We can now produce a fob that works with all panels which saves our engineers carrying loads of different brands 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.