Jump to content
Security Installer Community

Honeywell Reson8 8EP420 with Yale HSA alarm


Recommended Posts

Good afternoon.

My trusty Yale HSA2500 alarm failed this week, or at least the bell box did.  I have purchased a replacement Honeywell Reson8 (8EP420) bell box, which says it "can be connected to any intruder control panel".  I’m sure it can, but the connector designations are different and I don’t want to short anything. so may I intrude on your good selves to assist me with the connections?

 

I thought it would be really easy.  Come on, just five wires, what could be difficult about that.  PLEASE could you assist me?

 

The connections on the Yale control panel connect to the Yale Bell box thus:

 

Yale Control panel.  Yale Bell box

SRN -              to       BELL TRIG
STB-                to      STB TRIG

SUPPLY+        to     +12v AUX

SUPPLY- (1)    to     - 12v AUX

RTN-                to      BELL TAMP L

 

The connections recommended for the Reson8 are here:

 

Control panel                Reson8

-STROBE or ST-       to     STB-

BELL-                       to     TRIG-

TAMPER SUPPLY  to     HOLD OFF-

BELL+                      to     HOLD OFF +

TAMPER RETURN to      RTN-

 

I’m assuming that I connect like this:

Yale                                Reson8

SRN-  will connect to TRIG-

STB-  will connect to  STB- (that one makes sense)

 

But I am really worried about connecting them and the other three.  Please could I seek your assistance?  

I have attached a copy of the relevant page of the Yale manual, and here is a link to the Reson8 user manual.

 

https://www.tlc-direct.co.uk/Technical/DataSheets/Ade/TSRESON8_Install.pdf

 

May I thank you in anticipation, and express my gratitude in advance?.

Many thanks.

NOLBwithaD

 

“Any sufficiently advanced technology is indistinguishable from magic.”

Yale HSA 2500 P5 only.pdf

Edited by NOLBwithaD
Link to comment
Share on other sites

Not that I'ver touched either...

 

Yale Panel              Reson8

SRN -              to      TRIG-
STB-                to      STB-

SUPPLY+        to      HOLD OFF+

SUPPLY- (1)   to      HOLD OFF-

RTN-                to      RTB-

 

 

Mr? Veritas God

Link to comment
Share on other sites

Looks ok 

Just now, MrHappy said:

Not that I'ver touched either...

 

Yale Panel              Reson8

SRN -              to      TRIG-
STB-                to      STB-

SUPPLY+        to      HOLD OFF+

SUPPLY- (1)   to      HOLD OFF-

RTN-                to      RTB-

 

 

Blagger you look yellow to me 

Just now, al-yeti said:

Looks ok 

Blagger you look yellow to me 

I mean yalelow

  • Upvote 1
Link to comment
Share on other sites

Gentlemen all, thank you so much.  Too late to test at this time tonight, I’ll wait until the morning to try.

 

Very much appreciated.

 

MrHappy, you are spot on with the fact that these devices are very low tech, but that usually lasts the longest.  New tech is fantastic - when it works!

 

:-)

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.