virdi Posted January 2, 2018 Share Posted January 2, 2018 Hi all, Need some help please. Me and friend just installed a Premier Elite 48 and placed a Premier Elite DT PIR Sensor in the garage. However, the Garage PIR is causing false alarms within minutes of arming the system. We have turned the Microwave sensitivity right down to minimum and changed the Pulse Count Jumper to '2' ...but it's still setting off the alarm. What's the first thing I can try please? Could it be cold air blowing through the garage door or vents? Thanks Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted January 2, 2018 Share Posted January 2, 2018 PIR's and DT's are two separate things, can you confirm what you have? A PIR is not suitable for a garage. Pulse count should be higher for less sensitivity. Need to prove the sensor from the wiring and then the sensor from the environment. If you cover the sensor does it activate? If you stand still in front of the sensor does it activate? Quote Link to comment Share on other sites More sharing options...
virdi Posted January 2, 2018 Author Share Posted January 2, 2018 Sorry, I mean a Dual Tech sensor is installed the garage. The model of Sensor is ‘Texecom Premier DT’ I will try the steps you have suggested ...and get back to you. thanks Quote Link to comment Share on other sites More sharing options...
virdi Posted January 2, 2018 Author Share Posted January 2, 2018 (edited) This is the exact sensor I used Edited January 2, 2018 by virdi Quote Link to comment Share on other sites More sharing options...
PeterJames Posted January 2, 2018 Share Posted January 2, 2018 When did you install it? 2 Quote Link to comment Share on other sites More sharing options...
virdi Posted January 2, 2018 Author Share Posted January 2, 2018 3 minutes ago, PeterJames said: When did you install it? On Saturday Quote Link to comment Share on other sites More sharing options...
PeterJames Posted January 2, 2018 Share Posted January 2, 2018 Have you walked tested the system just to be sure that it is that detector thats activating? Link out the detector on the nc terminals then see if it still alarms when set, if not you have a dodgy detector. If it still alarms you have either a panel fault or a wiring fault, swap zones see if the fault moves with the swap, if it stays on the same zone its the panel. 2 Quote Link to comment Share on other sites More sharing options...
virdi Posted January 2, 2018 Author Share Posted January 2, 2018 Thank you. Will try those things. Yes, We did walk test the system and the detector did pickup movement at the time. Quote Link to comment Share on other sites More sharing options...
PeterJames Posted January 2, 2018 Share Posted January 2, 2018 2 minutes ago, virdi said: Thank you. Will try those things. Yes, We did walk test the system and the detector did pickup movement at the time. Did it display garage on the keypad when you walk tested? 2 Quote Link to comment Share on other sites More sharing options...
virdi Posted January 2, 2018 Author Share Posted January 2, 2018 Just now, PeterJames said: Did it display garage on the keypad when you walk tested? Yes ...I believe so. It also done the funny beep. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.