al-yeti Posted June 10, 2017 Share Posted June 10, 2017 12 minutes ago, karl taylor said: Thanks for the advise. Have now had to email risco again. To be honest now i have just about given up with the stupid thing. Small shed us saying Tamper with internal alarm going off. Tried 5 times today to fix it by unistalling and then reinstalling the sensor but no good. Have swapped sensor over with another one and it works fine in that zone but not for shed. Have even tried fitting my spare new sensor to it and also creating a new zone with either the old or new sensor but makes no odds. The system worked fine for a few years but now its knackered i think. Another fault which has happened at the same time is the landing window which has a wireless sensor on it when i open the window when the alarm is not activated it sets the full house alarm off. So i put the flag up, i need to get some one in now. I ring risco up on monday and find out who are the approved service engineers for the alarm in my area and take it from there now as i carnt do any more. I give up. Think now could be the time to ditch it. Whats one of the more realiable wired and wireless systems out at the minute? You need to bin it with all this Quote Link to comment Share on other sites More sharing options...
karl taylor Posted June 10, 2017 Author Share Posted June 10, 2017 Its looking that way at the minute. I am not surprised alot of risco cpx gear is getting flogged on ebay at the minute. I tried and failed to fix it myself. Carnt do any more. I think its all to do with its old technology in a modern house. Too much interference from new tvs with WiFi as got two of them and its just a primative system. I see what risco say monday as i see if i can a risco engineer out next week but costs v repair might not bother fixing it now. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted June 10, 2017 Share Posted June 10, 2017 He's the last chap who tried a DIY repair of his Gardtec hybrid radio system.... 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
karl taylor Posted June 10, 2017 Author Share Posted June 10, 2017 Lmfao. Like that. Yes have to see the funny side of it all, lifes to short not too. Bloody risco gear. I carnt understand why if an alarm is off when i open a landing window it set the full alarm off. Got to be a programing issue with that sensor and the **** panel. I see what risco say next week as i carnt do much more with it. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted June 10, 2017 Share Posted June 10, 2017 1 hour ago, karl taylor said: Its looking that way at the minute. I am not surprised alot of risco cpx gear is getting flogged on ebay at the minute. I tried and failed to fix it myself. Carnt do any more. I think its all to do with its old technology in a modern house. Too much interference from new tvs with WiFi as got two of them and its just a primative system. I see what risco say monday as i see if i can a risco engineer out next week but costs v repair might not bother fixing it now. Can't take you seriously now, has to be some blag in all this somewhere lol 1 hour ago, MrHappy said: He's the last chap who tried a DIY repair of his Gardtec hybrid radio system.... Ah I had one other day , just about swapped a Pir to another zone lol Why they make it so confusing or was gardtec risco and the wireless all botched together with a few firmware updates ( Mr texe will be reading firmware bit) Quote Link to comment Share on other sites More sharing options...
MrHappy Posted June 10, 2017 Share Posted June 10, 2017 8 minutes ago, al-yeti said: Why they make it so confusing or was gardtec risco and the wireless all botched together with a few firmware updates ( Mr texe will be reading firmware bit) well.... Texecom radio stuff is almost as bad as Risco Start deleting & changing devices & you soon find the menus are all over the place & far from logical 2 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
james.wilson Posted June 10, 2017 Share Posted June 10, 2017 sad thing is Gardtec was imo worth looking at. Risco isn't. Was cheap but shit hik will make Pyronix cheaper and ish. ill upvote a Texecom negative comment from a pro Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
james.wilson Posted June 10, 2017 Share Posted June 10, 2017 nice to see Texecom and Risco in a comparison Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
karl taylor Posted June 10, 2017 Author Share Posted June 10, 2017 I wish i could make this up. its a right mess about this risco stuff. Have taken the zones off the system tonight. And wait to see what i can do next week. No doing any thing until i speak to risco Quote Link to comment Share on other sites More sharing options...
james.wilson Posted June 10, 2017 Share Posted June 10, 2017 to be fair its probably knowledge. I'm not a fan but the kit does work, I'm assuming your doing it wrong. As your doing diy and risco are helping you on a product that is years old, you should look at the best supported pro product for diy. I wouldn't use it but quite a few on here do and hold it in high regard Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.