dannygd83 Posted April 3, 2017 Share Posted April 3, 2017 Hi everyone, the problem I have is in my new house I've managed to change codes and adjust programmes but on testing the external bell only sound outside when the alarm is full set A, and not part set B. any help would be much appreciated Quote Link to comment Share on other sites More sharing options...
black knight Posted April 3, 2017 Share Posted April 3, 2017 If you have a programming manual look at 60-64 and same range in 70's if memory serves Quote THE BLACK KNIGHT "Any comments / opinions posted are my opinion only and do not represent those of my employer or Company." Link to comment Share on other sites More sharing options...
dannygd83 Posted April 3, 2017 Author Share Posted April 3, 2017 Hi, thanks I made a mistake it's a 9651 model. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted April 3, 2017 Share Posted April 3, 2017 Part set b , c and d attributes can be changed from internal , internal + external, look at the settings for it in manual can't remember where lol The doc will be here soon if you don't find it 70 as in settings for d he might mean above Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted April 3, 2017 Share Posted April 3, 2017 63. Normally default internals only. Quote Link to comment Share on other sites More sharing options...
dannygd83 Posted April 3, 2017 Author Share Posted April 3, 2017 hi all, I really appreciate all your help with this but just can not seem to find this in the manual? any further help please. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted April 3, 2017 Share Posted April 3, 2017 (edited) Well, looks like I got here too late! OP, if you go to the manual section all about Part Set. I'm guessing you DO have the full engineer manual, not just the user one?? Hard to give a page number without knowing the exact model of 9651 (UK, EN, PD) and also the manuals changed slightly over the years... Edited April 3, 2017 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.