dave clarke Posted December 18, 2016 Share Posted December 18, 2016 Hi Guys, Anyone tell me the brand and model of this unit we have installed?? Trying to get a user manual and trying to get a spare keypad. Took back off it and wont resent, as display is now saying "Rem Tamp", which must mean it needs to be reset, but how???? - Any help would be greatly appreciated guys Thanks Dave Quote Link to comment Share on other sites More sharing options...
al-yeti Posted December 18, 2016 Share Posted December 18, 2016 Member ts? Or something Quote Link to comment Share on other sites More sharing options...
dave clarke Posted December 18, 2016 Author Share Posted December 18, 2016 What do you mean member ts?? Quote Link to comment Share on other sites More sharing options...
McP Posted December 18, 2016 Share Posted December 18, 2016 The panel manufacturer is Menvier but I don't know which model. Quote Link to comment Share on other sites More sharing options...
norman Posted December 18, 2016 Share Posted December 18, 2016 Possibly a TS700 Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
dave clarke Posted December 18, 2016 Author Share Posted December 18, 2016 Everyone, it's a TS700 Menvier, you guys have been a major help!! Have downloaded manual, but now "Rem Tamp" error on display not listed and wont reset, any ideas again - Sorry to be a pain in the Ass!! Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted December 18, 2016 Share Posted December 18, 2016 I assume this means 'remote keypad tamper' - did you take the keypad front off? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
MrHappy Posted December 18, 2016 Share Posted December 18, 2016 1 hour ago, dave clarke said: Everyone, it's a TS700 Menvier, you guys have been a major help!! Have downloaded manual, but now "Rem Tamp" error on display not listed and wont reset, any ideas again - Sorry to be a pain in the Ass!! Pic shows a TS790.Star Keypad, which may be connected to any of the TS Networker panels IIRC the square keypads haven't been made for 18 yrs & its replacement the netstar has'nt been made for about 10 yrs, There isn't any 2nd hand ones or new old stock currently on ebay, 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted December 18, 2016 Share Posted December 18, 2016 Early Starburst Menvier keypad, as above. You can revive them for a little while if you clean the contacts. You should be looking for new controls as any used stuff will have similar wear. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.