MrHappy Posted December 1, 2019 Share Posted December 1, 2019 27 minutes ago, Simon maddox said: What should I do? Become Batman & fight injustice ? or try a different telly / vga or composite video input ? Log into its webpage & select a lower HDMI resolution ? 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Simon maddox Posted December 1, 2019 Share Posted December 1, 2019 I will just buy a new tv can’t be arsed fighting injustice lol nice one Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted December 1, 2019 Share Posted December 1, 2019 Some sort of factory reset button or hardware switches on the back to change output? It's Floureon it's a pile of junk that none of the trade members here would use or know much about. Quote Link to comment Share on other sites More sharing options...
PeterJames Posted December 1, 2019 Share Posted December 1, 2019 It will have display settings in the menu, but you need to plug it in to a tv with a higher resolution in order to get to the menu. I would do that before buying a new TV you may find you just have a dodgy HDMI lead or DVR Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted December 3, 2019 Share Posted December 3, 2019 Sounds like Pete has a Floureon system at home Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted December 3, 2019 Share Posted December 3, 2019 9 minutes ago, datadiffusion said: Sounds like Pete has a Floureon system at home More or less Quote Link to comment Share on other sites More sharing options...
PeterJames Posted December 5, 2019 Share Posted December 5, 2019 On 03/12/2019 at 08:58, datadiffusion said: Sounds like Pete has a Floureon system at home Ive got piles of old tat that Ive ripped out and replaced, I use it to demo the rubbish over the good stuff I counted 20 different brands from Anke to Swann in our test room, many have the same pcb different firmware Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted December 5, 2019 Share Posted December 5, 2019 Yeah yeah Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted December 5, 2019 Share Posted December 5, 2019 19 minutes ago, PeterJames said: Ive got piles of old tat that Ive ripped out and replaced, I use it to demo the rubbish over the good stuff I counted 20 different brands from Anke to Swann in our test room, many have the same pcb different firmware You are wonderful I look up to you and think you are great Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted December 5, 2019 Share Posted December 5, 2019 Whereas I look down at him.... Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.