westy1 Posted January 7, 2017 Share Posted January 7, 2017 I would bet there is an issue with your camera PSU, either insufficient consumption or more likely it has developed a fault. It won't cost the earth to replace so just swap it out and that should solve the issue. Quote Link to comment Share on other sites More sharing options...
Rulland Posted January 7, 2017 Share Posted January 7, 2017 On Sun Nov 06 2016 at 9:09 PM, the_italian said: Further to that, I did also buy a 12V 5amp power supply unit and that doesn't work either. There is still no power to any cameras using that supply. Who ya gonna call....... Quote Link to comment Share on other sites More sharing options...
james.wilson Posted January 8, 2017 Share Posted January 8, 2017 op try them one at a time Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted January 8, 2017 Share Posted January 8, 2017 Hopefully he's fixed it by now Quote Link to comment Share on other sites More sharing options...
Simon maddox Posted December 1, 2019 Share Posted December 1, 2019 I have recently purchased the floureon h264 cctv system but when I connect it to my tv I have nothing can anyone help Quote Link to comment Share on other sites More sharing options...
MrHappy Posted December 1, 2019 Share Posted December 1, 2019 5 minutes ago, Simon maddox said: when I connect it to my tv how ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Simon maddox Posted December 1, 2019 Share Posted December 1, 2019 30 minutes ago, MrHappy said: how ? How what? It says mode not supported on my tv screen Quote Link to comment Share on other sites More sharing options...
MrHappy Posted December 1, 2019 Share Posted December 1, 2019 3 minutes ago, Simon maddox said: How what? well I ain't a native American saying hello.... 3 minutes ago, Simon maddox said: It says mode not supported on my tv screen The resolution of the HDMI / VGA of the DVR is too high for the TV ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Simon maddox Posted December 1, 2019 Share Posted December 1, 2019 Just now, MrHappy said: well I ain't a native American saying hello.... The resolution of the HDMI / VGA of the DVR is too high for the TV ? 1 minute ago, MrHappy said: well I ain't a native American saying hello.... The resolution of the HDMI / VGA of the DVR is too high for the TV ? 1 minute ago, MrHappy said: well I ain't a native American saying hello.... The resolution of the HDMI / VGA of the DVR is too high for the TV ? So what do I need to do?It says mode not supported on my tv screen What should I do? Quote Link to comment Share on other sites More sharing options...
al-yeti Posted December 1, 2019 Share Posted December 1, 2019 2 minutes ago, Simon maddox said: So what do I need to do?It says mode not supported on my tv screen What should I do? Buy better TV ? Question what TV model is ? You could take the DVR to someone else where it might support the resolution then in the menu , change it to lower resolution and then bring it back to yours But you must have an old TV if it doesn't display most models are atleast 1080p now and the DVR should have auto switched aswell Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.