james.wilson Posted October 18, 2016 Share Posted October 18, 2016 I really cant see that can be happening on ac fail if its wired like that Can you replicate it? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Tommygunn Posted October 18, 2016 Author Share Posted October 18, 2016 Al-yeti, I'll get some photos of the circuit boards and terminals as soon as. I know there has been water ingress on the bell box that I don't think activated as I've drilled some drain holes in the outer casing. However, it never reached the pcb only the status LED and corroded the legs, but it still functions. James, Yes, I want to do a full replication/full test as soon as, only one problem - the piezos. Is there a way to muffle them? I've tried stuffing cotton wool into the cones and taping over holes but it has little effect on the sound level. Is it feasible to attach LEDs in their place to act as activation indicators? Tom. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted October 18, 2016 Share Posted October 18, 2016 no the piezos run at high voltage. what happens if you disconnect the battery on the sab that is misbehaving? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted October 18, 2016 Share Posted October 18, 2016 34 minutes ago, Tommygunn said: Al-yeti, I'll get some photos of the circuit boards and terminals as soon as. I know there has been water ingress on the bell box that I don't think activated as I've drilled some drain holes in the outer casing. However, it never reached the pcb only the status LED and corroded the legs, but it still functions. James, Yes, I want to do a full replication/full test as soon as, only one problem - the piezos. Is there a way to muffle them? I've tried stuffing cotton wool into the cones and taping over holes but it has little effect on the sound level. Is it feasible to attach LEDs in their place to act as activation indicators? Tom. How do you know it didn't dry off on the PCB , was enough to short it , I have seen it on these bells before because of how cable is taken in and where rain has hit got behind it Maybe yours survived but symptoms were similar and you confirm now water got in PS if it's quiet you could disconnect them, make terminal on them, and you will here oscillation when activated Quote Link to comment Share on other sites More sharing options...
aissecur Posted October 19, 2016 Share Posted October 19, 2016 I've had a about three Honeywell bells randomly chirp then go off for no apparent reason in the past (usually when just out of warranty) - everything checked out ok with the rest of the alarm when tested (No sign of any water ingress either) Swapped them out for texecom bells & not had any issues since from those systems.. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted October 19, 2016 Share Posted October 19, 2016 1 hour ago, aissecur said: I've had a about three Honeywell bells randomly chirp then go off for no apparent reason in the past (usually when just out of warranty) - everything checked out ok with the rest of the alarm when tested (No sign of any water ingress either) Swapped them out for texecom bells & not had any issues since from those systems.. Water ingress dodgy fitting or other Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted October 20, 2016 Author Share Posted October 20, 2016 Gents, Thanks for the input so far. I'll have to back to this at the weekend as things are a little busy at the mo to go scrambling around on the roof and what not. Cheers, Tom. Quote Link to comment Share on other sites More sharing options...
aissecur Posted October 20, 2016 Share Posted October 20, 2016 I would say other, no sign of any water ingress, cable was not installed in such a way so water would track through to the bell. I Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted October 22, 2016 Author Share Posted October 22, 2016 (edited) Ok, I've taken some photos and done some tests and below is what I've observed. First, I conducted a manual test of the bell boxes, via the LCD keypad option, and both piezos sounded at the same time with the correct high/low siren. I then did a full alarm activation and everything worked as it should except that the 'rear' bell box just gave out regular high pitched beeps while the 'front' bell box gave out the correct high/low siren signature. Also, of course, no strobes for either bell box. I also replicated AC power loss but to no avail, none of the bell boxes sounded. Front bell box: Fully functioning piezo, non functioning strobe and no water damage. Rear bell box: Partially functioning piezo, not during full alarm, non functioning strobe and water damage. Tom. Edited October 22, 2016 by Tommygunn Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted October 22, 2016 Share Posted October 22, 2016 (edited) Bottom two pictures definately have issues with water damage. Bin. Personally I would buy quality sirens like Texecom. Elmdene etc... where the electronics are enclosed. Edited October 22, 2016 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.