Jump to content
ElecTech

URN Enquiry

Recommended Posts

Guys,

 

New to the monitoring side of things so have a quick question... I have a scenario where I have 1 x Galaxy 48... with one emizon unit sending PA, Int, Confirm etc through to the ARC...  It has multiple PA's on the Galaxy - do I need two URN's for the PA side of things or one to cover the whole site?

 

Thanks,

Share this post


Link to post
Share on other sites

you need a 1 x Intruder URN & 1 x PA URN

 

I assume new system, so will need 2 zones per PA to produce a confirm

Share this post


Link to post
Share on other sites
51 minutes ago, MrHappy said:

you need a 1 x Intruder URN & 1 x PA URN

 

I assume new system, so will need 2 zones per PA to produce a confirm

Only if the local force insists on that, otherwise single PA until false activations cause the URN to be removed,  then it will need to be confirmed. Two zones is one option, there are others as detailed in the relevant documentation.

Share this post


Link to post
Share on other sites

Ive yet to fit a confirmed HU on a new install.......

 

had a couple where weve lost URN. We had a site that the PAB's got soaked under a bar and went high res one night and it got policed X2...... so just set up HV on the galaxy and instructed the ARC

 

 

Share this post


Link to post
Share on other sites
On 19/09/2016 at 20:53, MrHappy said:

you need a 1 x Intruder URN & 1 x PA URN

 

I assume new system, so will need 2 zones per PA to produce a confirm

Happy... so a URN is not just specific to one site then? 

So you could have a site where basically police will only attend for confirm signals or just PA's?

 

I've learnt something new today... brilliant piece of information. 

 

Thanks

Share this post


Link to post
Share on other sites
20 hours ago, Litch90 said:

 

 

I've learnt something new today...

 

every day is a school day

Share this post


Link to post
Share on other sites
On 27/09/2016 at 21:37, 9651 said:

Ive yet to fit a confirmed HU on a new install.......

 

had a couple where weve lost URN. We had a site that the PAB's got soaked under a bar and went high res one night and it got policed X2...... so just set up HV on the galaxy and instructed the ARC

 

 

What's HV on galaxy?

Share this post


Link to post
Share on other sites

Not sure what 9651 was referring too regards hv was this sia code,could of been ht but hv if in log is actually cv (control voltage) either induced or an attempt to disable the zone 

Share this post


Link to post
Share on other sites

Depends how you read the post HV on a galaxy or HV on SIA

 

Dont know if i like the way confirmed HU works on a galaxy yet

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×

Important Information

By using this site, you agree to our Terms of Use.