Guest kscott Posted October 22, 2004 Share Posted October 22, 2004 Hi all, Following your excellent advice on the forum, I am going to replace my existing bell-box. The question is - are all bell-boxes going to be compatible with my current alarm system? It's already got the wire going from the control box indoors to the existing (broken) bell-box, so I am hoping to just use the same wire and just fit it to the new box (which I haven't bought yet). Or is it more complicated than that? Will all boxes be compatible? For the record, I currently have a Menvier Networker TS690R. Thank you once again for your advice, Kieran Link to comment Share on other sites More sharing options...
Guest Posted October 22, 2004 Share Posted October 22, 2004 Without hijacking anybody's posts and as solely my own opinion (hopefully nobody hijacks this opinion from me) I say that yes they mostly are compatible. Link to comment Share on other sites More sharing options...
Guest Posted October 22, 2004 Share Posted October 22, 2004 But since this particular bellbox is unknown type for me I suggest you to wait for few more opinions for the most compatible bellbox. Link to comment Share on other sites More sharing options...
Mister_Dave Posted October 22, 2004 Share Posted October 22, 2004 If you let us know what box it is we could probably tell you the direct replacement for it. Dave Oxendale York based security systems engineer. Link to comment Share on other sites More sharing options...
Adi Posted October 22, 2004 Share Posted October 22, 2004 Texecom range are good with there engineer hold-off mode. I really can't be ar**** with it anymore. Link to comment Share on other sites More sharing options...
Guest Posted October 22, 2004 Share Posted October 22, 2004 I prefer S&W.. Easy to "ring the bell" when needed.. Link to comment Share on other sites More sharing options...
Service Engineer Posted October 22, 2004 Share Posted October 22, 2004 are all bell-boxes going to be compatible with my current alarm system? It's already got the wire going from the control box indoors to the existing (broken) bell-box How many core is the cable currently feeding your existing Bellbox? ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.