Jump to content
Security Installer Community

Single 8 Core Cable Feeding Two Detectors


matt6697

Recommended Posts

Hi, 

 

After inspecting the wiring from a previous installation I've noticed that the person who installed the wiring originally has used an 8 core cable to supply two detectors, and connect the global tamper in series which to me seems acceptable, but they have also spured the 12V supplies from one detector to anther.  

 

Would this be acceptable if I left it as it is?, as each zone will still be independent from one another?, just to be honest I've never really come across many cases like this and if it was me I would use a 6 core cable for each detector! 

Edited by matt6697
Link to comment
Share on other sites

No problemo, you are lucky they didnt wire 5 detectors off of 1 8core

  • Upvote 1

The opinions I express are mine and are usually correct!

(Except when I'm wrong)(which I'm not)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.