drc200 Posted October 9, 2015 Share Posted October 9, 2015 Hello, I have wired an extension and been asked to add a couple of PIR's and Door contacts to an existing Bells only system its a Scantronic 9651. There are not enough zones present in the panel so have added a 9954 expander. Now the problem is that I cant find the extra zones, The system has 2 keypads, one with no link the other with id 2 link. The 9954 has no link set for id. Do I need to kick start the panel? will this delete config or passcodes? I am expecting the extra zones to appear as zone 9 onwards as the id is not set in the expander. I know the Menvier panels can be asked to rescan the system hardware, is this possible or nescessary on the 9954? Any advice would be much appreciated. Thank you Dave Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted October 9, 2015 Share Posted October 9, 2015 9954 does not work on 9651, simples. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
antinode Posted October 9, 2015 Share Posted October 9, 2015 The 9651 can't be expanded. You'll have to change the board to a 9751, which can be expanded to 24 zones. Quote Trade Member Link to comment Share on other sites More sharing options...
drc200 Posted October 9, 2015 Author Share Posted October 9, 2015 Thanks Guys, Simple when you know. If I change to 9751 can I reuse the 9930 keypads? Quote Link to comment Share on other sites More sharing options...
antinode Posted October 9, 2015 Share Posted October 9, 2015 Yes, the keypads will work fine. The board is the same size too, IIRC. Quote Trade Member Link to comment Share on other sites More sharing options...
drc200 Posted October 9, 2015 Author Share Posted October 9, 2015 Thats handy may save a bit of hassle. Thanks for your help Quote Link to comment Share on other sites More sharing options...
al-yeti Posted October 9, 2015 Share Posted October 9, 2015 Good time to get rid of all together admit it doc Quote Link to comment Share on other sites More sharing options...
timmo66 Posted October 10, 2015 Share Posted October 10, 2015 Good time to get rid of all together admit it doc Nothing wrong with the 9651 Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted October 10, 2015 Share Posted October 10, 2015 Or the 9751 for that matter! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted October 10, 2015 Share Posted October 10, 2015 Come on don't be sensitive Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.