spike27 Posted August 28, 2015 Share Posted August 28, 2015 Below is a screenshot of our non-resistored RSC install sheet for your reference: Quote http://www.linkedin.com/profile/view?id=74794063 Link to comment Share on other sites More sharing options...
spike27 Posted August 28, 2015 Share Posted August 28, 2015 Below is a screenshot of our non-resistored RSC install sheet for your reference: Unfortunately, I posted this in the wrong thread so if the mods would like to remove it then feel free. Quote http://www.linkedin.com/profile/view?id=74794063 Link to comment Share on other sites More sharing options...
charlie6 Posted August 28, 2015 Share Posted August 28, 2015 Might as well leave it here Spike, nothing wrong with a double input of this sort. Fair 50mm gap..a good suitable all-rounder. Quote Link to comment Share on other sites More sharing options...
Amps Posted September 1, 2015 Share Posted September 1, 2015 Ha ha. We always used CQR for a couple of years until we started to get loads of callouts with them going Hi Res. Moved to knights and had very few problems apart from the magnet dropping out of its glue inside the contact. It seems like there isn't enough glue to hold it in so we now add a dab of silicone, job done. Just installed a Knights D75 contact. Loads better than the Yend74 and no chance of the magnets dropping out as the are about five times bigger and a snug fit. A much more robust contact, just a shame it doesn't have eol resistors. Quote Link to comment Share on other sites More sharing options...
whistle Posted September 1, 2015 Share Posted September 1, 2015 The only problem is that you need to put the resistors in the D75 we where going to start using them over the yend74 but didn't for this reason. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted September 1, 2015 Share Posted September 1, 2015 d75 multi? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
datadiffusion Posted September 1, 2015 Share Posted September 1, 2015 Ah but isn't that replaced by the YEND74? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
james.wilson Posted September 1, 2015 Share Posted September 1, 2015 iirc the d75 replaced the yend units Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
whistle Posted September 1, 2015 Share Posted September 1, 2015 Do they do a D75 multi? The d75s I ordered off enterprise came without. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted September 1, 2015 Share Posted September 1, 2015 iirc the d75 replaced the yend units Ah possibly, I know one replaced another Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Amps Posted September 1, 2015 Share Posted September 1, 2015 http://www.knightfireandsecurity.com/view_item.asp?id=334 Quote Link to comment Share on other sites More sharing options...
james.wilson Posted September 1, 2015 Share Posted September 1, 2015 yes https://www.securitywarehouse.co.uk/catalog/knight-g2-surface-contact-with-tact-tamper-and-selectable-res-p-3868.html Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
whistle Posted September 1, 2015 Share Posted September 1, 2015 Thanks for that, will order them next time. Quote Link to comment Share on other sites More sharing options...
spike27 Posted November 30, 2015 Share Posted November 30, 2015 Ah possibly, I know one replaced another Hello all. Bit late to see this, but the D75MULTI is an addition to our range i.e. it didn't replace anything. The YEND74 is one of our most popular contacts and is predominantly used as G3, but also contains a header to bypass the Magnetic Interference Detection thus making it suitable for G2 also, thus reducing van stock / distributor storage space required. The D75 is for those who want to add their own resistors - the D75MULTI comes complete with resistors (both obviously cheaper than the YEND74). All of these products contain 2 free spacers in each pack. Quote http://www.linkedin.com/profile/view?id=74794063 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.